Irmo, SC, United States
About this listing
The Royer R-122 MKII Ribbon Microphone is the world's first phantom powered, active ribbon microphone. The R-122 MKII takes a classic, first-of-it's-kind active ribbon microphone to a new and better place of functionality and performance - if that were even possible!
The Royer R-122 MKII is a compact, monaural, phantom powered ribbon microphone with a switchable -15 dB pad and a low cut filter. Soni- cally similar to our groundbreaking R-121, the R-122 MKII exhibits a flat frequency response and a well-balanced, panoramic soundfield, but it’s 13 dB more sensitive and has a faster transient response, giving a sense of more open highs. Like the R-121, it is capable of handling high SPL applications.
The Royer R-122 MKII’s -15 dB pad is positioned before any other electron- ics, giving the microphone 15 dB more headroom for high SPL work. The low cut filter is configured to reduce proximity effect for close miking and vocal applications and effectively filters rumble. The R-122 MKII’s active electronics produce an output comparable to studio condenser microphones and provide an optimum impedance to the ribbon element, preventing overdamping of the ribbon and assuring consistent micro- phone performance. The high gain and low output impedance of the R-122 allow it to operate with any microphone preamplifier with phantom power, and also allows for use with long cable runs.
The Royer R-122 MKII utilizes a low mass, 2.5-micron, pure (99.99%) aluminum ribbon element in a patented offset-ribbon transducer assembly. The smooth frequency response and phase linearity of the R-122 MKII, coupled with its sophisticated active electronics system, enable it to deliver a consistent natural acoustic perfor- mance with extraordinary realism. Frequency response is excellent regardless of the angle of sound striking the ribbon, and off-axis coloration is negligible. The R-122’s patented offset-ribbon design positions the ribbon element toward the front of the microphone body, which allows for high SPL handling on the front (logo) side and the option of a slightly brighter response when recording lower SPL sound sources on the back side (3 feet and closer; phase reversed in this position).
Royer R-122 MKII Ribbon Microphone Features
Active electronics provide high output capability, optimal impedance to the ribbon element, extremely low self-noise and low output impedance
-15 dB pad and low cut filter provide greater flexibility and increased headroom
High SPL capabilities for electric guitar and percussion instruments
Absence of high frequency peaks, "ringing" and phase shifts
Ribbon element unaffected by impedance/load, heat or humidity
Operates on standard 48-volt phantom power
Gold plated XLR contacts
Royer R-122 MKII Ribbon Microphone Applications
Close and distant miking
Electric and acoustic guitar
Vocals, commercial broadcast, voiceover
Brass, horn sections
Drum overheads, kick drum (see manual for position), room miking
Percussion instruments
Strings - solo & sections
Acoustic piano, harp
Live events - recording and sound reinforcement
Royer R-122 MKII Ribbon Microphone Specifications
Acoustic Operating Principle: Electrodynamic pressure gradient with active electronics.
Polar Pattern: Figure-8
Generating Element: 2.5-micron aluminum ribbon
Magnets: Rare Earth Neodymium
Frequency Response: 30 - 15,000 Hz ±3 dB
Sensitivity: -34 dB (re. 1v/pa ±1 dB)
Switchable Pad: -15 dB
Switchable Bass Cut: 100 Hz (6 dB per octave)
Self-Noise: < 18 dB
Output Impedance: 200 Ohms, balanced
Output Connector: Male XLR 3-pin (Pin 2 Hot)
Rated Load Impedance: 1K-Ohm minimum
Maximum SPL: 135 dB @ 30 Hz
Power Requirements: 48-Volt Phantom Only
Supply Current: 4 mA
Dimensions: 206mm L X 25mm W (8 1/8" L X 1" W)
Weight: 309 grams (10.9 oz)
Finish: Burnished Satin Nickel
Microphone Warranty: Lifetime to original owner (repair or replace at Royer's option)
Ribbon Element Warranty: One Year
Royer R-122 MKII Ribbon Microphone Includes
Royer R-122 MKII Ribbon Microphone
Protective Wood Case
Microphone Sock
Microphone Clip
Royer Brochure
Quick start guide
2x Cable Ties
Royer Sticker
Manufacturer Warranty
PriceA$2,960.30
+ A$146.61 Shipping
A$88.84 shipping when combined
14-Day Return Policy
Enjoy peace of mind with your new gear
