Toronto, Canada
À propos de cette annonce
The Dynaudio 18S is an active DSP subwoofer that extends Dynaudio studio monitors into the deep bass, turning a two-way stereo or surround setup into a three-way system for mixing and mastering. Two opposed 9-inch MSP+ Hybrid Drive long-throw woofers sit in a sealed cabinet, driven by a 500 W Class D amplifier, and reach down to 16 Hz. Built-in presets match the crossover to BM, LYD and other Dynaudio monitors, while distance alignment and parametric EQ fit the sub to your room.
Matched to Dynaudio Monitors
Dynaudio measured its studio monitors and stored a performance map for each one in the 18S. Choose your speaker model on the rear-panel display and the sub sets its low-pass filter to suit. Presets cover the BM6 and BM15 Classic, BM5 mkIII, LYD 5, LYD 7, LYD 8, LYD 48 and M5P, and Dynaudio adds new models through firmware updates over USB. With speakers from other makers, you set the low-pass frequency yourself.
Setup and Room Tuning
Enter the distance from the listening position to each monitor and to the sub, and the 18S applies time and phase delay so its bass arrives in step with the speakers. Three bands of parametric EQ pull down room modes, and a switchable 80 Hz high-pass filter on the outputs keeps the lowest bass out of the monitors. The monitors connect through the sub's balanced XLR or unbalanced RCA outputs, and a 12 V trigger input handles remote standby control.
Features
Two opposed 9-inch MSP+ Hybrid Drive long-throw woofers in a sealed cabinet
500 W Class D amplifier
DSP presets for Dynaudio BM, LYD and M5P monitors
Distance compensation with time and phase delay
Three-band parametric EQ
Switchable 80 Hz Linkwitz-Riley high-pass filter on the outputs
Rear-panel display and rotary controller for setup
Master and slave operation for multiple subwoofers
Auto standby and 12 V trigger input
USB service port for firmware updates
Specifications
Type: Active DSP subwoofer, sealed enclosure
Woofers: 2 x 9" MSP+ Hybrid Drive, opposed
Amplifier: 500 W Class D
Frequency range: 16 Hz to 230 Hz (+/- 3 dB)
Maximum SPL: 110 dB
Inputs: 2 x balanced XLR, 2 x unbalanced RCA
Outputs: 2 x balanced XLR, 2 x unbalanced RCA
Low-pass filter: Preset or adjustable
High-pass filter (outputs): 80 Hz, switchable
Phase: 0 or 180 degrees
Trigger input: 5 to 12 V DC
AC power: 100-120 V / 200-240 V, 50/60 Hz
Power consumption: 490 W maximum, 0.5 W standby
Dimensions (W x H x D): 447 x 300 x 268 mm (17 5/8 x 11 3/4 x 10 1/2 in)
Weight: 22.1 kg (48.7 lb)
In the Box
Dynaudio 18S subwoofer
Mains power cable
Document pack
PrixC$2,199
Expédition gratuite
Expédition gratuite
depuis Toronto, Canada
Politique de retour de 14 jours
Profitez de votre nouveau matériel en toute sérénité




