Backlit Electric Jazzblaster Hardtail 2019 Black
I love the Mastery stuff, nothing touches it, but I wanted to see a hardtail jazzmaster with something else besides a hardtail strait bridge.
Plate is from a duo sonic/tornado. Saddles are not Fender, they're higher end Stainless steel modern saddles and they sing well. There isn't another one like it that I'm aware of. Fender poly body.
The pickups are widerange repro's from Brandonwound. I've tried every aftermarket widerange, Lollar, SD etc. I believe his to be the best. They'll never be 100% like the CBS era becuse noone is able to thread cunife. These are alnico 5 and the best of all on the market.
Imagine a telecaster deluxe that looks like a JM..... That's what this one feels like.
Knobs are real deal 1950's oxblood bakelite from a vintage radio shop.
Pickguard is custom cut to fit the bridge. Since the body is routed for WRHB's, you can cut a new guard to fit nearly any pickup without any routing needed if you want to change it up.
Neck is on the thicker LP 50's shape side. .89 at one and .96 at 12.
Modern tall frets, 9.5 radius.
Unique neck finish. I started using the ErnieBall music man method on all my roasted necks (sealer coats of tru oil-followed by wax after the oil sets.
I had to tint this one with some dye based tint first (stew mac "straw")since it wasn't roasted, but I did all the rest of it the same. Makes for the fastest, resonant necks. Feels really good. Tusq nut cut and setup for 11's.
Plate is from a duo sonic/tornado. Saddles are not Fender, they're higher end Stainless steel modern saddles and they sing well. There isn't another one like it that I'm aware of. Fender poly body.
The pickups are widerange repro's from Brandonwound. I've tried every aftermarket widerange, Lollar, SD etc. I believe his to be the best. They'll never be 100% like the CBS era becuse noone is able to thread cunife. These are alnico 5 and the best of all on the market.
Imagine a telecaster deluxe that looks like a JM..... That's what this one feels like.
Knobs are real deal 1950's oxblood bakelite from a vintage radio shop.
Pickguard is custom cut to fit the bridge. Since the body is routed for WRHB's, you can cut a new guard to fit nearly any pickup without any routing needed if you want to change it up.
Neck is on the thicker LP 50's shape side. .89 at one and .96 at 12.
Modern tall frets, 9.5 radius.
Unique neck finish. I started using the ErnieBall music man method on all my roasted necks (sealer coats of tru oil-followed by wax after the oil sets.
I had to tint this one with some dye based tint first (stew mac "straw")since it wasn't roasted, but I did all the rest of it the same. Makes for the fastest, resonant necks. Feels really good. Tusq nut cut and setup for 11's.
| Pubblicato | 7 anni fa |
|---|---|
| Condizione | Mint (Usato) Gli articoli Mint sono essenzialmente nella loro condizione originale, ma sono stati aperti o utilizzati.Scopri di più |
| Marchio | |
| Modello |
|
| Finish |
|
| Anno |
|
| Prodotto in |
|
Le informazioni sulla sicurezza del prodotto sono disponibili qui.

