Toppobrillo MultiFilter 2 (Black) Eurorack State Variable Multimode Filter Module

The newest version of the eurorack classic, the Toppobrillo Multi-Filter!

Multi-filter 2 is a fully featured state variable multi-mode filter with an acidic sound.  It features two audio inputs with a voltage controlled crossfader to mix them, v/oct tracking cutoff, Individual Low-pass Band-pass and Hi-pass outputs as well as a variable output (continously variable from Low-pass to High-pass with either Notch or Bandpass in the middle, selectable by switch - try feed an output back to the VC Mode input for more squelch!)  Also features VC Resonance and PING input for pinging the filter - great when using the filter as an oscillator or adds an accent in a more regular patch.

Multi-filter 2 is a great filter for acid sounds or for experimenting with more west-coast type techniques.

Features:

• Dual input crossfading mixer with voltage controlled gain and saturation.
• Dedicated "Ping" input percusses the filter.
• Variable Mode output: continuously-variable voltage controlled response with selectable NP (Notch) or BP at center.
• Variable response can track frequency for some interesting sweep variations and modulation options.
• Voltage controlled resonance, or "Q".
• Self-oscillates reliably over entire range- doubles as a very playable audio source or LFO with multi-phase outputs.
• Tracks V/OCT over roughly 4 octaves.
• Fully buffered outputs and low noise design.
• Shallow form-factor.

Specifications:

12HP

45mA @ +12V

45mA @ -12V

0 mA @ 5V

20 mm deep