Beomaster 2400 is an advanced FM stereo receiver with identical technical specification and performance. On its primary control panel Beomaster 2400 had no knobs or buttons. The panel functioned electronically and needed only the contact of your finger to activate it.

Equipped with the slim remote-control module you could select between four pre-set radio stations or record player input, adjust the volume up or down or put the System into Stand-by. The illuminated panel with its large display allowed to to easily see the state of play from anywhere in the room. The phase-locked loop decoder ensured a wide separation between stereo channels and remained stable over a very long lifetime. When a stereo broadcast was received, a symbol ‘S’ lit up automatically on the fascia of the set. Automatic Frequency Control (AFC) kept the selected radio station spot on tune, and a muting circuit cut out inter-station noise during tuning.

The stereo amplifier produced 2 x 30 watts RMS of high-fidelity output and had DIN sockets for the connection of two pairs of speakers, a record-player and a tape or cassette recorder. All the secondary switches and adjustments were protected beneath a hinged lid, but an illuminated readout panel showed you the set’s operational status at a glance.

A headphone connection was provided beneath the front edge of the unit. Controls not needed every day were situated beneath a hinged lid. These included tone and balance adjustment, FM pre-setting, loudness, AFC and Mono / Stereo switches, and a switch for selecting a basic initial volume level. This facility allowed you to choose the volume at which the amplifier began to play each time it was switch on – no matter how controls were left the previous time.

This is a completely cleaned and fully restored item. All parts are original, tested, fully functional.

Specifications

Manufacturer: Bang & Olufsen

Model: Beomaster 2400-2

Type number: T2901

Serial number: 2286020

Type: Receiver

Made in: Denmark

Designer: Jacob Jensen

Colour: Rosewood, Teak, Silver

Dimensions: 65 x 615 x 247 mm
Weight: 7.6 kg

Color: Rosewood, Teak, and White

Amplifier Specifications

Power Consumption: 185W (110–130V / 220V variants)

Connections: DIN connections for phono and tape, plus a headphone jack

Frequency Response: 20 – 20,000 Hz
Minimum continuous RMS power: 25 W per channel at 8 ohms
Speaker impedance: minimum 4 ohms
Maximum total harmonic distortion: - 0.2%
Intermodulation: - 0.15%

FM tuner range 87.5 – 108 MHz

Power consumption: 25 – 185 W

Harmonic Distortion: Less than 0.13%

RIAA: built-in


FM Tuner Specifications

Frequency Range: 87.5 – 108 MHz

Presets: 4 or 5 FM preset programs with continuous manual tuning

Decoder: Phase-locked loop (PLL) stereo decoder

Additional Functions: Automatic Frequency Control (AFC)

Connections

- Headphones jack
- Speakers: 2 set
- Tape: DIN
- Phono: DIN

Special feature

Cordless remote control, sensi-touch operation