For sale, a kit of set of two conversion shim to install "dogear" P90 pickups as direct replacement for any Humbuckers guitar. No extra Hole needed... for flat top LP (Jr, DC, Special) or ES175, L and all guitares boxes with neck extension.

But please check the thickness of the sum of the dogear housing + adaptor '3.5mm at neck position' (where the whole pickup body sits inside). It can required some wood working for achieve a proper installation with LP Std or SG (where the space from table to the strings may be too short. Then you will need a partial route of the cavity for the P90 pickup to be partially (~2 mm deep) inside the guitar body). Then the routed cavity will be hidden by both the P90 or the humbucker ring and then the adaptor will be only useful to avoid the drilling the two side holes or the P90. Ask me questions if you want more...

1> The conversion kit will come with 4 flat head flat screws + two specific screws to joint the P90 dogear housing (which isn't included) to the shim itself.
2> 'flat' OR 'radius' shims option (just msg me) for a perfect interface for your P90 dogear housing to your guitar body.
3> They're made from 3d printer. Thus the result isn't perfect like molded injected plastic but still good and cheaper...

4> Std Color is black, cream or gold, but could be all color I have as custom order...

5> The height of each could be tailer-made with custom if needed... just msg me.

i) neck is 3.5mm thick

ii) bridge is 4.5mm thick

6> Bridge pup height : you may need to have to brigde pickup closer to the strings, then a specific shim is availble of extra 5€ as special request.