LOOP-MASTER PEDALS 1-LOOP STEREO TRUE BYPASS LOOPER – STEREO EFFECTS LOOP SWITCHER V1 IN STOCK, MADE IN USA!

LOOP-MASTER PEDALS 1-LOOP STEREO TRUE BYPASS LOOPER – STEREO EFFECTS LOOP SWITCHER

⠀
Add true bypass switching to your stereo effects and turn an entire stereo effects chain on or off with a single footswitch.

Perfect for stereo pedals, effects without their own bypass switch, or moving hard-to-reach pedals to one convenient switching point on your pedalboard.

⠀
DIMENSIONS
• 4.37" x 2.37" x 1.1" (11.1 x 6.0 x 2.8 cm / 111 x 60 x 28 mm)

⠀
POWER
• Boss/Ibanez 2.1mm center-negative 9V DC for LED only
• Audio path is fully passive (works without power)

⠀
WHAT IT DOES
• One stereo true bypass effects loop
• Turn one stereo effect or an entire stereo effects chain on/off with one stomp
• Adds true bypass capability to stereo effects
• Completely removes the effects loop from the signal path when bypassed
• Grounds the loop send when bypassed for zero bleedover
• Great for effects that do not have their own on/off switch

⠀
HOW IT WORKS
• Connect your instrument or pedalboard signal to INPUT
• Connect SEND to the input of your stereo effect or effects chain
• Connect the main output of your effect to RECEIVE
• Connect the stereo output of your effect to STEREO RECEIVE
• Connect the Loop-Master outputs to the next stereo device, amps, or other stereo destination
• Leave your effects switched on and use the Loop-Master footswitch to bring the entire stereo loop in or out of your signal path

⠀
BENEFITS

⠀
🎛 ONE-STOMP STEREO CONTROL
• Activate or bypass your stereo effects setup with a single footswitch

⠀
🎚 TRUE BYPASS
• Completely removes the effects loop from your signal path when bypassed
• Helps eliminate unwanted loading from pedals you don't want permanently in your signal chain

⠀
🔇 ZERO BLEEDOVER
• Loop send is grounded when the loop is off to prevent unwanted effect bleed

⠀
👣 PEDALBOARD FRIENDLY
• Use it as a convenient front-row switch for stereo effects mounted farther back on your pedalboard

⠀
🔗 CONTROL MULTIPLE EFFECTS
• Place multiple stereo effects in the loop and switch the entire chain together

⠀
REAL-WORLD USE
• Stereo delay
• Stereo reverb
• Stereo chorus and modulation
• Multi-effects processors
• Vintage or tone-loading effects
• Effects without built-in bypass switching
• Multiple stereo effects that need to be activated simultaneously
• Hard-to-reach pedals mounted on the back row of a pedalboard

⠀
BUILD QUALITY
• True bypass switching
• Point-to-point wiring
• Premium jacks
• Durable aluminum enclosure
• Reliable footswitch design
• Handmade in the USA

⠀
POWER NOTE

• The audio switching is passive and continues to function without power minus LED indication

⠀
For full product lineup, see loop-master.com