Toronto, Canadá
Información sobre este anuncio
The Blackstar HT Stage 60 212 MK III is a 60 W tube combo with two 12-inch Celestion speakers, for gigging guitarists who want two speakers in one combo. Two EL34 power tubes and two ECC83 preamp tubes drive three channels with two voices each, and Resonance and Presence controls set the overall low and high end. A front switch reduces output to 6 W, and three sets of speaker outputs handle extension cabinets from 4 to 16 ohms.
Three Channels, Six Voices
The clean channel switches between an American voice, bright with a firm low end, and a British voice with looser bass and a warmer midrange that breaks up when you push it. The voice switch changes the preamp voicing, EQ, tube gain structure and power amp damping together. OD 1 moves from a classic overdrive to a modern voice with more bass and less power amp damping. OD 2 goes from a hot-rodded classic voice to a modern voice with a mid-focused boost ahead of the gain stage, and its Gain control runs from crunch to saturated lead. Both overdrive channels share Bass, Middle, Treble and Blackstar's patented ISF control, which sweeps the tone stack from an American response with a tight low end to a woodier British response.
Footswitching and Recording
The included FS-15 footswitch toggles between the clean channel and an overdrive channel, and its second button flips the clean voices or chooses between OD 1 and OD 2. The optional FS-14 adds direct access to every channel and voice, a 6 dB boost and reverb on and off. CabRig emulates the power amp, speaker, cabinet, microphone and room, and a rear switch recalls three stored CabRig patches for the balanced XLR output, the stereo line out and headphone jack, and USB-C. Over USB the amp sends four channels to a computer at once: stereo emulated left and right, the preamp signal before reverb and cab emulation, and the dry guitar. Blackstar's Architect software edits CabRig and sets reverb decay separately for the clean and overdrive channels.
Features
60 W tube combo with 2 x EL34 and 2 x ECC83 tubes
Two 12-inch Celestion speakers
Three channels and six voices, all footswitchable
Patented ISF tone control on the overdrive channels
Resonance and Presence controls
Power switch for 60 W or 6 W output
Speaker outputs for 4, 8 and 16 ohm loads
Digital reverb with a rear Dark (room) and Light (plate) voicing switch
CabRig speaker emulation with three stored patches, editable in Architect software
Balanced XLR and stereo line out/headphone outputs that stay live in standby for silent practice
Effects loop with +4 dBu / -10 dBV level switch
USB-C audio with 4 channels out and 2 in, using standard drivers
5-way footcontroller jack for the optional FS-14 (channels, voices, boost and reverb)
2-way footswitch jack with an external switching mode for TRS switchers
Kensington security slot
Designed to accept 6L6 power tubes after rebiasing at an approved Blackstar service center
Specifications
Output power: 60 W RMS
Tubes: 2 x EL34 (power), 2 x ECC83 (preamp)
Speakers: 2 x 12" Celestion, 8 ohm each
Channels: Clean, OD 1 and OD 2, two voices each
Clean controls: Select, Volume, Voice, Bass, Treble
OD 1 and OD 2 controls: Select, Gain, Volume, Voice
Overdrive EQ: Bass, Middle, Treble, ISF
Master controls: Reverb, Resonance, Presence, Volume, Power (60 W or 6 W)
Speaker outputs: 1 x 16 ohm; 1 x 8 ohm or 2 x 16 ohm; 1 x 4 ohm or 2 x 8 ohm
CabRig outputs: Balanced XLR, stereo TRS line out/headphones
Effects loop: Send, return, +4 dBu / -10 dBV switch
Footswitch: FS-15 2-way included, optional FS-14 5-way
USB: USB-C audio, 4 channels out, 2 channels in
Weight: 29.4 kg (64.8 lb)
Dimensions: 707 x 520 x 260 mm (27.8 x 20.5 x 10.2 in)
In the Box
Blackstar HT Stage 60 212 MK III combo
FS-15 2-way footswitch
Mains power cable
PrecioC$1,769
Envío gratis
Envío gratis
desde Toronto, Canadá
Política de devoluciones de 14 días
Disfruta de tu nuevo equipo sin preocupaciones




