Pieńków, Poland
About this listing
The
Moog Mother-32 is the first tabletop semi-modular synthesizer from
Moog. It is a distinctive analog instrument that adds raw analog sound,
sequencing and extensive interconnectivity to any electronic or modular
ecosystem. This expansive new live performance and production instrument
is handcrafted in Asheville, NC and has been meticulously designed to
provide musicians with a diverse array of creative tools to inspire new
music, unique sound and endless sonic exploration.Mother-32 comes
secured in a rugged extruded aluminum enclosure with wood sides and
features a voltage controlled 32-step sequencer with 64 sequence
locations, definitive Moog low pass and high pass Ladder Filter, 2
voltage controlled mixers, a classic Moog oscillator with dual outputs,
wide-range LFO with audio-rate modulation capability, MIDI input and
MIDI to CV conversion, white noise, a modular patchbay with 32
patch-points for extended synthesis complexity and an assignable CV jack
with 16 assignable sources.• Semi-Modular design requires no patching for swift, inspired music creation• Voltage Controlled 32 Step Sequencer with 64 Sequence Locations• Low Pass & High Pass Moog Ladder Filter (20Hz–20kHz) with voltage controlled resonance• External audio input for processing outside sound sources• Definitive Moog oscillator with Pulse and Sawtooth wave outputs• 5-pin MIDI input and MIDI to CV converter• 32 Modular Patch Points (Includes 5 patch cables)• 2 Voltage controlled mixers• Superb companion to Werkstatt 01, Minitaur and other synthesizers• Main module can be easily transferred into a Eurorack skiff or case• Mount 2 or 3 units vertically with optional 2 and 3 Tier kits• Complete solution for new Eurorack users – no other items required VOLTAGE CONTROLLED OSCILLATORSingle VCO with simultaneous Sawtooth and Pulse wave Outputs (+/-5V)1 V/Octave from 8Hz to 8KHz (16KHz max with LFO/CV)Panel Frequency control (+/-1 Octave)Toggle Selector for waveform routed to the mixerPulse Width controlLinear FM and 1V/Octave Exponential FM inputs (+/-5V)NOISEOutput normalled to Ext Audio inputWhite Noise output (+/-5V)VOLTAGE CONTROLLED MIXERCrossfades between selected VCO waveform and Ext Audio input (normalled to White Noise)Mix CV input (+/-5V)VOLTAGE CONTROLLED FILTER20Hz to 20KHz switchable Low Pass/High Pass 4-pole Transistor Ladder Filter with voltage controlled ResonanceVCF Cutoff input (+/-5V)VCF Resonance input (+/-5V)VCF Output (+/-5V)VOLTAGE CONTROLLED AMPLIFIERSelectable CV Source: EG or ON (drone)VCA CV input (0 to +8V in EG mode and +/-5V in ON mode, summed with signals from ON/EG switch) Output Volume Control (VCA Out and Line/Headphone Out)VCA output (+/-5V) and rear panel 1/4" Headphone/Audio Output (+/-1.7V peak)LOW FREQUENCY OSCILLATORSquare wave output (+/-5V)Triangle wave output (+/-5V)Selectable waveshape to VCO and VCF MOD sectionsPanel Rate control .1Hz to 350Hz (600Hz max)LFO Rate CV input (+/-5V)ENVELOPE GENERATORVariable controls for Attack and DecaySustain ON/OFF for single-trigger (ASD) or multi-trigger (AD) behaviorExternal Gate input (0 to +5V; Tolerant of 10V gates)EG output (0 to +7.5V)VCO MODULATION Selectable Source: EG/VCO MOD or LFO (EG normalled to VCO MOD in)VCO Mod input (normalled to EG/VCO MOD switch position)Variable Modulation Amount controlSelectable Modulation Destination: VCO Pitch or PWM (PWM summed with Pulse Width panel control)VCF MODULATIONSelectable Source: EG or LFOVariable Modulation Amount controlSelectable VCF Modulation Polarity (+/-)VOLTAGE CONTROLLED MIXER/ATTENUATORVoltage controlled crossfade/mix circuit for mixing two DC coupled signalsMix 1 Input (Normalled to ground)Mix 2 Input (Normalled to +5V)Mix Control CV input (-5V to +5V)Mix Output: Un-inverted output (-5 to +5V)MULTIPLE1x input 2x output signal multiplierMult Input: Buffered signalMult Outputs: 1 and 2KEYBOARDSingle octave 13-note keyboard (In Step Edit Mode this is used to select, mute and enable sequencer steps.)Octave Up/Down buttons select from 8 available octave settingsGlide Time controlKB CV output (-5 to +5V)Gate Output (0 to +5V)SEQUENCERDual-mode 32 step sequencer with 64 sequence locationsPerformance Modes:- In KB Mode, the Keyboard is used to play the instrument, enter sequence data and transpose sequences.-
In Step Mode, the keyboard functions as the step sequencer
interface and is used to enable and mute steps, update note data and
select sequence banks.Each sequence step includes: Note
Value, Gate Length (Tie), Rest On/Off, Accent On/Off, Glide On/Off and
Ratchet count (up to 4 note-repeats occurring in the duration of a
single note)Sequencer Panel Controls: Tempo, Swing, Run/Stop, Hold, and ResetSequencer Control Inputs: Tempo, Run/Stop (also used for sync), Reset and HoldSequencer Control Outputs: KB, Gate, Accent PulsePATCHBAYThe patchbay contains 32 patch points (3.5mm)Available
Inputs: External Audio, Mix CV, VCA CV, VCF Cutoff, VCF Resonance, VCO
1V/Octave, VCO Linear FM, VCO Modulation, LFO Rate, Mix 1, Mix 2, VC Mix
Control, Mult, Gate, Tempo, Run/Stop, Reset and HoldAvailable Outputs: VCA, Noise, VCF, VCO Saw, VCO Pulse, LFO Triangle, LFO Square, VC Mix, Mult 1, Mult 2, Assign, EG, KB, GateASSIGNABLE OUTPUT
• Multipurpose control output for selecting from 16 available
functions: Sequencer Accent, Sequencer Clock, Sequencer Clock /2
Sequencer Clock /4, Decimated "Ramp”, Decimated "Saw”,
Decimated "Triangle”, Stepped Random, STEP 1, MIDI Note On Velocity,
MIDI Channel Aftertouch, MIDI Pitch Bend, MIDI CC1 Mod Wheel, MIDI CC2,
MIDI CC4 and MIDI CC7SPECS • Dimensions: 12.57“W x 4.21“H (with knobs) x 5.24“D • Weight: 3.5 lbs. • Power Consumption: 2.8W • Included Power Supply: 100-250VAC, 50-60Hz, +12VDC 1A • Patchbay: 32x 3.5mm jacks • Rear Panel Audio Out: ¼” Headphone / AudioEURORACK SPECS • Current Draw: 230mA (+12V – from 10-pin header) • Mounting Dims: 60HP (.69” 26mm Module Depth)
Pricezł3,841.15
Free Shipping
Free Shipping
from Pieńków, Poland
