Brantford, Canada
About this listing
The MOOER 'Red Truck' is an all in one solution for the professional guitarist on the go. Following diligent research we've integrated a combination of the most commonly used and desirable effects pedals into one, simple to use, floor unit.The all analogue Boost, Overdrive and distortion circuits provide lush warm tones. A fully comprehensive collection of high quality digital effects including Modulations, Delays and Reverbs with Tap tempo control provide spacious and ambient atmosphere via the stereo outputs. A highly visible and precise tuner will make sure you are always in tune on stage.A built in parallel effects loop makes it easy to use with your favorite stompboxes or connect to your favorite amplifiers using the 4 cable method. The Red Truck has stereo outputs and a dedicated Mixer output with speaker simulation for direct connection to your favorite mixing board or audio interface. All the parameters and functions are laid out in front of you just like a traditional pedalboard. Easy to view and adjust on the fly.The Red Truck is compact and easy to transport with the tidy soft-case we have included in the box. No matter where in the world you are going to play and what you need to connect to you can always take a fully professional pedal effects rig with you with ease.Happy Truckin!!!Pedal LayoutTAP: Press several times for tap tempo. Hold for TunerFootswitch 1: REVERB on/off in LIVE mode. Preset 1 in PRESET modeFootswitch 2: DELAY on/off in LIVE mode. Preset 2 in PRESET modeFootswitch 3: MOD on/off in LIVE mode. Preset 3 in PRESET modeFootswitch 4: DIST on/off in LIVE mode. Preset 4 in PRESET modeFootswitch 5: DRIVE on/off in LIVE mode. Preset 5 in PRESET modeDISPLAY SCREEN: Displays the current operation mode of red truck. Displays the tuner when activatedOperation ModesRedtruck has two different operation modes. LIVE MODE and PRESET MODE To change operation mode, simultaneously press and release TAP + Footswitch 11.Live ModeIn this mode Redtruck operates like a traditional pedalboard. Each footswitch willswitch it’s respective effects module on and off.2.Preset ModeIn this mode Redtruck operates like a pedalboard loop switcher. Each footswitch will recall a preset combination of which effect modules are on/off.The DISPLAY SCREEN will displaywhen in Preset Mode*Ensure Red truck is in LIVE MODE*Activate the effect modules you want to use in your preset*Press and hold the corresponding footswitch where you wish to save the preset for use in Preset mode*The Footswitch light will flash 5 times to confirm that the preset has been saved to this footswitch*After you have saved your presets, put the Redtruck into PRESET MODE and press any footswitch from 1-5 to recall it’s preset.Note: Effect parameters can not be stored to the presets. Only the on/off state of each effect module will be stored.Effect ModulesRed truck has 6 stompbox style effect modules and a built in precision tuner.1.PURE BOOST: Based on one of MOOER’s most popular and useful micro pedals. The Pure boost is an analog circuit which can provide up to +20 Db of clean boost with a natural and dynamic response to the touch.ON/OFF: Switches the boost effect on and offBOOST: Adjusts the over all amount of boostBASS: Adjusts the low frequencies ±15dbTREBLE: Adjusts the high frequencies ±15db2.DRIVE: Based on the MOOER RUMBLE DRIVE, the DRIVE module of Red truck is a warm and natural analog overdrive circuit. At higher gain it can emulate a vintage amplifier being pushed into breakup. At lower gain settings settings it is perfect for pushing the DIST module for solos or as a warm boost for the guitar.VOLUME: Adjusts the output levelGAIN: Adjusts the amount of overdriveTONE: Adjusts the EQ. Clockwise is brighter, Counter clockwise is darker3.DIST:A classic British style amplifier distortion with full tone stack, independent gain and level controls. The gain ranges from a slight crunchy breakup to a full and harmonically rich high gain saturation.TREBLE: Adjusts the high frequenciesMID: Adjusts the middle frequenciesBASS: Adjusts the low frequenciesLEVEL: Adjusts the overall output levelMID-BOOST:Boosts and scoops the middle frequenciesGAIN: Adjusts the amount of distortion4.MOD:A digital multi-modulation unit which brings together tremolo, phaser, chorus and flanger.LEVEL: Adjusts the modulation effect mixRATE: Adjusts the modulation effects speedDEPTH: Adjusts the modulation intensity Toggle Switch:Selects the modulation effect typeRythm Knob:Adjusts the speed of the modulation effect in relation to the tap tempo. (X = random 7s pattern)5.DELAY:A digital delay unit with 3 different kinds of delay. DIGITAL resembles the crystal clear delay racks of the 80’s. ECHO resembles the magnetic drum delays of the 60’s. ANALOG resembles a classic BB style delay stompbox.LEVEL: Adjusts the volume of the delays repeatsTIME: Adjusts the delay timeFEEDBACK: Adjusts the number of repeatsToggle Switch: Selects the delay typeSub-division Knob: Adjusts the delay time in relation to the tap tempo6.REVERB:A true stereo digital reverb unitLEVEL: Adjusts the wet/dry mix of the reverbDECAY: Adjusts the length of the reverbTONE: Adjusts the EQ of the reverbSHIMMER: Adds a high pitched shimmering harmony to the reverb.MOD DEPTH: Rotate clockwise to add modulation to your reverb and adjust the reverb modulation’s depth. When this control is fully counter-clockwise the reverb will not have any modulationMOD RATE: Adjusts the speed of reverb modulation effect7.TUNER: Red Truck has an accurate built-in guitar tuner. Hold down the TAP foot switch to mute your output and activate the tuner. Press the TAPfoot switch once to exit the tuner and un-mute your output.Tap TempoTAP: Press and release this foot switch several times to create a Tap Tempo.Tap tempo can control both the delay time and modulation rate simultaneously oreither of these two effect modules independently. The light surrounding the TAPfoot switch will illuminate a different colour to indicate what it is controlling. Youcan change the tap tempo function by pressing a combination of two footswitches simultaneously. See below.DELAY + MOD = Purple (press foot switches 3 + 4)DELAY only = Blue (press foot switches 1 + 2)MOD only = Red (press foot switches 2 + 3)By default the tap tempo will control both the delay time and the modulation rate simultaneously. The TAP foot switch light will illuminate purple to indicate this.CONNECTIONS1.INPUT: Connect your instrument to this input using a standard 1/4” jack cable2.FX LOOP: Refer to the ‘USING THE FX LOOP’ section of this manual for more details3.CAB SIM OUTPUT: Connect to this output using a mono or stereo 1/4”jack cable This provides an output with integrated speaker cabinet simulation for connectingheadphones or Direct to your PA system or recording console4.OUTPUT:Connect to these outputs using standard 1/4”Jack cablesConnect to L only for mono outputConnect to L and R for true stereo output5.DC IN 9V（±10%）≥300mAUSING THE FX LOOPRedtruck comes equipped with an integrated, transparent, buffered effects loop. This sits between the DIST and MOD modules in the internal signal chain. The FX LOOP can be used in many different ways, making the Redtruck a true “swiss army knife” of a pedal. Here’s a few of our favorites…..SEND: Can also be considered as DIST outputRETURN: Can also be considered as MOD input-Add your favourite pedal or preamp to the chain -This is an easy way to add an extra pedal into the Redtruck signal chain, right inbetween your DIST and MOD. Connect SEND to the input of your favourite pedal. Connect the output of the pedal to the RETURN of Redtruck.We like to use this with our Micro Preamp pedals for the ultimate in portable rigs.- 4 cable method -If your amplifier has it’s own effects loop you can connect the Redtruck using the “4 cable method” which will put the drive modules in front of your amplifiers input and the modulation, delay and reverb modules into your amplifiers effects loop.*Connect your guitar to the input of your red truck*Connect SEND of the Redtruck to your amplifiers input*Connect your amplifiers “effects send” to the Redtruck RETURN*Connect the OUTPUT of Redtruck to the “effects return”of your amplifier WET DRY SETUP -This is an easy way to setup Redtruck with 2 amplifiers. One amplifier with just the drive signal. The other amplifier with drive signal, modulation, delay and reverbeffects. This is a very popular setup method used by professional guitarists to maintain astonishingly clear and articulate tones while still having beautiful atmospheric effects for live shows. To accomplish this setup you will also require an ABY box. We recommend the MOOER ABY mkII*Connect your guitar to the input of Redtruck*Connect SEND of the Redtruck to the input of your ABY box*Connect one output of the ABY box to the input of AMP Dry*Connect the other output of the ABY box to the RETURN of Red truck*Connect the OUTPUT of Redtruck to the input of AMP Wet L(see diagram)If you have a 3rd amplifier you can use both stereo outputs of Redtruck to make a WET DRY WET setup taking full advantage of a big, wet, true stereo reverb, whilst maintaining an awesome clear guitar tone. Technical ParametersInput: 1/4’ signal input audio interface (impedance 2M ohms)Output: 1/4 "left and right channel audio interface x2 (impedance 100 ohms)Sampling rate: 44.1KSampling accuracy: 24bitPower supply: DC 9V ≥ 300mA power adapter (negative inside positive) ( not included )Size: 370 mm (D) X 96 mm (W) X 51 mm (H)Weight: 1200gNo Duty to Canada and USA*****MY PRICE INCLUDES ALL TARIFFS****** FAST N' FREE USA Shipping (typically about 5 or so days via UPS Mail Innovations and USPS Final Mile LAST MILE TRACKING)Some items we ship FREE some we do not, Reverb lets you know ( Temporary measure due to Global Trade Chaos)**( About tracking, since USPS Ground Advantage now is LAST MILE tracking please do not worry about your item NOT tracking, if it shows your item is in Niagara Falls NY. Then I have done my job already and shipped it. While you think it is not moving, it actually is and at final mile it will track properly. )**We Ship from our warehouse in Canada (NOT from an Amazon warehouse and NOT rejects or returns, in fact we never re-sell returns that's what PAWN Shops are 4) CANADIAN DISTRIBUTOR Ships from Canada (depending on stock availability, may also ship from our Niagara Falls NY. location) **Just to be clear on DUTY, (regardless of what REVERB warns buyers of ) The United States-Mexico-Canada Agreement (USMCA is in place that allows US buyers to purchase/import in to the United States from Canada with NO Duty at all, State taxes are another story, some states charge a TAX some do not, BUT NO duty. ( NOTHING TO PAY AT THE DOOR ) **We ship DDP meaning DUTY +Tariffs PRE paid by us to our shipper, Reverb's warning about paying @ the door does NOT apply to us. 4 now at least LOL**Final thought. Please shop responsibly, every purchase you make from a North American seller helps OUR economy on THIS Continent.
Original Price$252
$37.80 off
New Price$214.20
Free Shipping
Free Shipping
from Brantford, Canada
