Più suono, meno stress.
Abbiamo abbassato le commissioni e rinnovato gli strumenti per i venditori e gli acquirenti del Regno Unito.
Più suono, meno stress.Abbiamo abbassato le commissioni e rinnovato gli strumenti per i venditori e gli acquirenti del Regno Unito.

Electronically generated audio will usually sound starkly different to acoustically generated sound. This is more-often-than-not a desirable thing, but there are times when you might want to bring the “depth” of an acoustic environment back into your mix.

The obvious difference between acoustic and synthesised sounds is that acoustic instruments have resonators, and exist in reverberant spaces. One way to add depth to an electronic sound is to somehow simulate the characteristics of a space, and mix this with the original signal.

Reverberation can be defined as the sum of all the reflections created from an initial sound source within a space, at a point within that space, over time.

To simulate this effect we can pass a sound through a spring with two transducers at either end. As the sound propagates it will cause the spring to expand and contract, creating a series of reflections that are picked up by the transducers (along with the original sound). This creates a simulation of reverberation with (in the case of spring of the reverb) a characteristic and classic colour.

FEATURES:


The module has two audio inputs both of which can be CV or slider controlled:
– “IN1” is routed both to “DRY” mix and reverb tank input
– “IN2” Goes only to the reverb tank

The module also has 2 outputs:
– “WET” comes straight from reverb tank
– “MIX” is the mix of DRY signal and the output of reverb tank. It has CV control

It is possible to feedback the “WET” signal back into the module via “IN2” in either a straight feedback path or after passing through other modules before returning to “IN2”.

With the “MIX” control we can control the amount of reverb and feedback in the mix while maintaining the presence of the original signal.

The module also features a high-pass filter at the input of the tank to control the colour of the reverberation and to tame saturation that may be created in the spring during feedback.

Finally there is a built-in VU meter connected to the “WET” output to visualise the level and saturation of the signal.

CondizioneNuovo (Nuovo)
Gli articoli "Nuovi” sono venduti da un rivenditore autorizzato o dal produttore originale e comprendono l’imballo originale.Scopri di più
Marchio
Modello
  • Spring Reverb Eurorack Synthesizer Module
Finish
  • Stock
Categorie
Anno
  • 2010-present
Passo Orizzontale
  • 8HP
Funzione Modulo Synth
  • Reverb
Formatto Modular Synth
  • Eurorack

Le informazioni sulla sicurezza del prodotto sono disponibili qui.

Rubadub

Hillington, Gran Bretagna
Iscrizione a Reverb::2019

Protezione di Reverb

Resi semplici, transazioni sicure, assistenza di persone in carne e ossa

Scopri di più

Checkout sicuro

Annunci simili in promozione













Recensioni del prodotto

Reverb Gives

Con i tuoi acquisti dai un contributo ai programmi musicali rivolti ai giovani, aiutandoli a ricevere gli strumenti di cui hanno bisogno.

Ops, forse hai dimenticato qualcosa. Verifica i campi evidenziati in rosso.