Marshall PB100 Power Brake 100W Attenuator 1990's England
This is a very nice and rare Marshall PB100 Power Brake Attenuator made in 1990's in England.
It is used and shows some scratches and wear but is fully functional and in very good overall condition.
Overview:
Marshall Power Brake is an attenuator that allows you to control the volume level of your amplifier in eleven 3dB switchable stages. This effectively can take you from stage, through studio, down to bedroom practice volume, with the unique tone created by driving at full power. Marshall Power Brake will not "strangle" the natural tone of the amplifier and the 3dB steps give you smooth control of the power settings for every situation.
Specs:
Power handling: 100 W
Impedance: 8 Ω / 16 Ω, selectable
Attenuation: 11 steps, in 3 dB increments
Maximum attenuation: −30 dB on the standard scale
Silent operation: Yes, using the 12th-position load setting
Input: 1 × amplifier input
Speaker outputs: 2 × 1/4-inch speaker jacks
Cooling: Self-powered, variable-speed fan
Load type: Inductive/reactive load
Power supply: No external power required
Dimensions (W × H × D): Approximately 225 × 120 × 200 mm
Weight: Approximately 4.8 kg
Protezione di Reverb per gli acquirenti
Reverb ti protegge nel caso in cui il tuo articolo venga perso, danneggiato o non corrisponda alla descrizione. Basta segnalare eventuali problemi entro 7 giorni e ti aiuteremo a ottenere il rimborso completo.Scopri di più sulla Protezione di Reverb per gli acquirenti.
| Pubblicato | 17 giorni fa |
|---|---|
| Condizione | Molto buono (Usato) Gli articoli "Molto buoni" possono mostrare qualche piccolo segno o graffio ma sono pienamente funzionali e in buone condizioni generali.Scopri di più |
| Marchio | |
| Modello |
|
| Finish |
|
| Categorie | |
| Anno |
|
| Prodotto in |
|
| Impedenza |
|
| Famiglia colore |
|
| Gestione di Potenza (Watts) |
|
Le informazioni sulla sicurezza del prodotto sono disponibili qui.






