G-Storm Electro ProADSR Dual Envelope Eurorack Module 8HP

ProADSR is a 3310-based dual envelope generator with that special je ne sais quoi you didn't know your sound was missing.

• Colorfully exponential Attack-Decay-Sustain-Release contours.
• Decay goes from very snappy (1ms) to slow as molasses (130s).
• Lots of short-range decay adjustment
• Metal shaft potentiometers and Mini-Contempo knobs

Each envelope has:

• GATE input w/ red LED indicator + trimmer dimming
• 2 buffered positive-voltage output contours
• a DC inverted contour

Contour Measurements

• minimum GATE signal required | 4.2v
• ATTACK range | 1ms to 10s
• DECAY range | 2ms to 130s
• RELEASE range | 2ms to 40s
• positive contour magnitude | 10v peak
• inverted contour magnitude | -10v peak

RE-GATING BEHAVIOR | At gate off the envelope proceeds to the RELEASE stage. If RELEASE is still sounding off when a new gate is received, the envelope picks up again at the ATTACK stage at the extant voltage position.

Measured Current demands

+12v | 58mA

-12v | 24mA

+5v | none

module depth | 24mm

Module includes a 10-pin to 16-pin Eurorack ribbon connector. Rack screws are not included due to large assortment and highly varying individual preferences, I personally use After Later Audio Rack Thumb Screws (sold separately).

ProADSR pairs well with my ProVCF