Chiyoda-ku, Japan
About this listing
Paul's Guitar, made in 2013 and featuring artist grade flame maple, is now in stock in used condition! Paul's Guitar Paul's Guitar, like the Modern Eagle, is a model that has been the inspiration for many of Paul's new ideas in sound throughout the history of PRS, and Paul himself has decided all the specifications, from wood selection to pickups. Paul's Gutiar is the embodiment of Paul's aspirations not only as a guitar builder, but also as a guitar player who needs a guitar that works in every genre and environment. Body, Neck, and Fingerboard The body is a royal combination of artist-grade flame maple top, mahogany back, and mahogany neck. The fingerboard is made of Honduran rosewood. Neck Shape The neck shape is the "Pattern" shape used on McCarty and other guitars, which is rounder than the Pattern Regular and has a slightly grippier feel. Pickups Paul's Guitar & 408" pickups developed for this instrument are installed. This pickup, which allows 8 different sounds with 4 coils, is derived from "Sorcerer's Apprentice Guitar" which was created by Paul's own experiments in the early 1980's. The "Paul's Guitar & 408" pickup was developed specifically for this instrument. The PUs are derived from "Sorcerer's Apprentice Guitars," which were created by Paul's experiments in the early 1980s, and each can be switched between "single and hum" with a mini-switch. Unlike other models, this guitar has less coil-tap feeling like too thin, and we can confidently recommend this sound to those who usually use G or F guitars. Two mini-toggle switches are located between the volume and tone knobs, and with this setup, either or both pickups can be set to full single-coil mode, giving you a crisp and unique vintage single-coil sound in both single-coil and humbucker positions. This allows for a crisp and unique vintage single-coil sound in both single-coil and humbucker positions. A longtime favorite of guitarists in a variety of genres, PRS is sure to find its maximum performance in a variety of live, session, and recording situations. Condition The paint is slightly faded and there are some minor scuffs and scratches, but it is in relatively clean condition with little signs of use. The neck, frets, truss rod, and other playing-related conditions are all in good condition. The neck, frets, truss rod, etc. are all in good playing condition, and have been fully adjusted and fretted at our repair center upon arrival, so you can use it with confidence. Item Rank: B+: Some scratches, but no problem in normal use. Serial number: 13 198562 Year of manufacture: 2013 Country of manufacture: USA Case: Hard Case (Genuine) Accessories: Tag, wrench, manual Weight: 3.44kg Truss Rod: No problem, rod is set at 60 degrees to the left and right. Fretboard Height: No problem, fretboard height is high enough. String height on bass side: 2.0mm above 12th fret String height on treble string side: 1.5mm above 12th fret Nut width: 42.8mm Neck thickness near 1st fret: 22.09mm Neck thickness near 12th fret: 24.3mm SCALE: 635mm (25") RADIUS: 254mm (10") Strings in setup: ERNIE BALL 2221 / .010-.046 set Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment * Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed. * If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors. The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument. * This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time. We apologize in advance if the item is sold out after you place your order. Specs Product rank B+: Some scratches, but no problem in normal use. Serial number 13 198562 Year of manufacture 2013 Country of manufacture USA CaseHard case (genuine) AccessoriesTag, wrench, manual Weight 3.44kg No truss rod problem, rod is confirmed to be 60 degrees to the left and right. Fret remainder no problem, fret height is high enough String height: 2.0mm above the 12th fret on the bass string side String height 1.5mm above the 12th fret on the treble string side Nut width 42.8mm Neck thickness near 1st fret 22.09mm Neck thickness near 12th fret 24.3mm SCALE 635mm (25") RADIUS254mm (10") Strings at setup ERNIE BALL 2221 / .010-.046 set Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment*** The shipping cost to most countries is included in the listed price ***All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.Accessories: Please confirm the picture.Precautions for electronic instruments that use a power supplyThe voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.Please note!All import duties, customs fees, and procedures are the buyer's responsibility - please be aware of the requirements for your countryWe will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.More information please confirm our shop policy.
PriceR$24,820.36
+ R$6,672.14 Shipping
