Tallinn, Estonia
About this listing
500 Series Mic Pre / DI / Compressor by Rupert Neve Designs.Based on the Portico 5017 Mobile Pre, the 517 provides world-class transformer-coupled micpreamp, compressor and DI circuitry with Vari-phase, “Silk” and DI/mic blending capabilities – all in a single 500 series module.Mic Pre and Instrument AmplifierThe 517’s mic pre – based on the TEC Award-winning Portico 5017 – provides up to 66dB of gain, polarity-reverse and phantom power switches, and the “Silk” circuit for a more vintage vibe. The separate instrument amplifier includes 30dB of gain, a ground lift, variable phase and an instrument Thru connection.Blended UseUsed as a single channel device for instruments, the 517 can be used to phase align, combine and compress direct and amplified signals. To achieve this, use the DI for the instrument’s direct signal and the mic preamp for the speaker cabinet signal. The blend control is used for mixing direct and amplified signals to achieve the desired tonal blend between the two sources, and the variphase is used to minimize or extenuate phase cancellations between the two signals. To compress the blended signal, the internal compressor jumper must be set to the blend path (this is the default setting). This technique could also be used to create a single, mixed output of a guitar and vocals.CompressionFor signals below the “threshold” level that has been set, a compressor provides a linear path allowing signals to be amplified without the gain being adjusted in any way. When signals exceed the “threshold” level, the gain is reduced in a controlled manner that depends on the Ratio that has been set.GainGAIN range provided is from -6dB to +20 dB. As already noted, when compression has taken place, it may be necessary to increase the overall gain to restore the apparent program levelPeakWhen engaged, the 543 uses a combination of peak and RMS (average) detection to determine level. When disengaged, it follows just RMS.SC HPFIntroduces a HPF at 250Hz to the VCA side chain signal. This allows the compressor to disregard sustained low frequency content.RatioRange from 1:1 to LIMIT (i.e. 40:1)ThresholdRange from -30dBu to +20dBUAttack TimeRange from 20 mS to 75 mS.Release / Recovery TimeRange of RELEASE time is 100 mS to 2.5 Seconds.Stereo OperationWhen the LINK switch is engaged on two 543 modules and settings are approximately the same values, GAIN reduction on both channels will be the same to preserve stereo balance and position. This will work properly in link buss enabled 500 series racks, or by hardwiring two 543 modules link busses together in non-compatible racks.DuckingWhen the LINK switch is engaged on two connected 543 modules, the signal passing through the first module may be used to control the amplitude of a second module. For example, the level of music through channel A can be controlled by speech on channel B, i.e. reducing the music level to make a “speech-over” announcement.We ship worldwide, feel free to ask for a precise shipping quote. The listed ex VAT / VAT0% price applies if you have a company with a valid EU VAT number or if you're based outside of EU. Non-EU buyer pays the import duty and tax as regulated by their local customs. Private buyers in EU are a subject to VAT. We would have to add and charge 24% VAT tax part from private buyers in EU.
Original Price€950.67
9% price drop
New Price€868
Incl. VAT
+ €99.20 Shipping
Only 1 left
Grab it before it's gone
