Cosmotronic Aphelion - Silver

Cosmotronic Aphelion packs a stereo distortion and low/high pass filter into a compact 8HP design, making it ideal for live performance setups. It features three unique stereo distortions in parallel with a continuous crossfade between them, controlled with the character knob or a cv input.

• The first circuit is an overdrive that adds a lot of warmth and fattens up  the sound without becoming too harsh.
• The second one is a saturating wavefolder, that can add interesting extra harmonics depending on the waveform of the material.
• The last distortion is inspired by the classic RAT guitar pedal. It adds an aggressive feel and grit to the sound.

A mix knob lets you blend the dry input signal with the distorted signal, before it hits the filter. Setting it fully dry bypasses the distortion effect. 

If you need even more dirt, there's a handy +12dB gain switch, to really drive the inputs into overdrive. If you want to keep your low-end undistorted, you can switch on the Low-cut filter.

The  non resonant stereo filter combines a low pass and high pass stage, and uses an IC based on  the classic SSM2040. This filter is also overdriven, adding some warm distortion and extra  harmonics to the original signal, and limiting the output level. The cutoff knob has no effect in the centre, turning CCW creates a low pass and CW a high pass effect.  It's possible to control the low and high pass filter cores independently using CV. The filter bypass switch can be used for instant reintroduction of all frequencies into the mix upon release—a great tool for live performers.  Lastly the level knob can be used to attenuate the output.  

• Width: 8HP
• Power: 100mA @ +12V / 80mA @ -12V
• Depth: 28mm

Features:

• 8HP stereo distortion and filter module ideal for live setups
• Three stereo distortion types: 1) Overdrive for warmth and fatness 2) Saturating wavefolder for added harmonics 3) RAT-inspired distortion for aggressive, gritty sound
• Character knob and CV control for crossfading between distortions
• Mix knob to blend dry and distorted signals, with full bypass option
• +12dB gain switch for added distortion intensity
• Low-cut filter switch to preserve low-end frequencies
• Stereo filter with low pass and high pass, based on classic SSM2040 IC
• Cutoff knob: CCW = low pass, CW = high pass
• CV control for independent LP/HP manipulation
• Filter bypass switch for quick effect toggling
• Output level attenuation control