EMS VCS3 1969 + Crickewood DK2 + documents , fully serviced, many mods
PriceC$41,385.86
+ C$844.61 Shipping
This listing has ended
See similar gear from other Reverb sellers
Listed:7 years ago
Views:5,184
Saves:83
Offers:9
ANGERS, France
May be the unique chance to purchase one of the first VCS3's made back in 1969 ! EMS VCS3 + DK2 + original documents / fully serviced/ many invisible and reversible mods added (see below!)
Serial # 214 VCS3
Fully serviced in 2014 by a reputed tech in Belgium.
Huge and quite expensive work !
VCS3 + DK2 have been fully calibrated according to the EMS service manual procedure.
Many invisible modification using matrix and push pull pots, no extra holes drilled in the panel :
1- OSC 2 and OSC 3 SHAPE CV via the reverb mix column - pull the SHAPE knob will connect it to the reverb mix column
2 - Audio/LFO RANGE fo each OSC - pull the SINE or SQUARE knob changes the range
3- SYNC of osc 1 slaved to osc 2 and/or osc 3 when their triangle know is pulled.
Os1 ramp knob selects 2 sync depths
4 – OSC 1 and 2 stabilisation (LM394H)
5 – Temperature compensation (TYCO tempco)
6 – Filter 4 or 5 pole selector (pull the frequency knob for 5 pole)
7 – Filter Response control (pull the response knob for voltage control via the meter column)
8 - filter slew/unslew - Pull up the « level » knob makes the filter receptive to audio range CV and allow nice FM and percussive sounds - excellent !
9 – Envelope ATTACK and DECAY times x10 + ON and OFF times x10 (both
mods together can produce cycles longer than 5 minutes !)
10 – TRAPEZOID polarity control - pulling the knob inverts the trapezoid
11 – Gate input modification on a control output jack socket
12 - 2 x 1V/oct precalibrated CV input on the HIGH LEVEL jack inputs, to have 1V/oct, set the corresponding input level pot to 10. Tracks ok on 5 octaves with the frequency dial in central position.
Buffers keep the CV stable regardless of the number of pins . new vernier dials firmly mounted to metal standoffs instead of the terrible rubber strip used on the very early units
13 - new caps in the PSU
14 - new trimmers
Serial # 214 VCS3
Fully serviced in 2014 by a reputed tech in Belgium.
Huge and quite expensive work !
VCS3 + DK2 have been fully calibrated according to the EMS service manual procedure.
Many invisible modification using matrix and push pull pots, no extra holes drilled in the panel :
1- OSC 2 and OSC 3 SHAPE CV via the reverb mix column - pull the SHAPE knob will connect it to the reverb mix column
2 - Audio/LFO RANGE fo each OSC - pull the SINE or SQUARE knob changes the range
3- SYNC of osc 1 slaved to osc 2 and/or osc 3 when their triangle know is pulled.
Os1 ramp knob selects 2 sync depths
4 – OSC 1 and 2 stabilisation (LM394H)
5 – Temperature compensation (TYCO tempco)
6 – Filter 4 or 5 pole selector (pull the frequency knob for 5 pole)
7 – Filter Response control (pull the response knob for voltage control via the meter column)
8 - filter slew/unslew - Pull up the « level » knob makes the filter receptive to audio range CV and allow nice FM and percussive sounds - excellent !
9 – Envelope ATTACK and DECAY times x10 + ON and OFF times x10 (both
mods together can produce cycles longer than 5 minutes !)
10 – TRAPEZOID polarity control - pulling the knob inverts the trapezoid
11 – Gate input modification on a control output jack socket
12 - 2 x 1V/oct precalibrated CV input on the HIGH LEVEL jack inputs, to have 1V/oct, set the corresponding input level pot to 10. Tracks ok on 5 octaves with the frequency dial in central position.
Buffers keep the CV stable regardless of the number of pins . new vernier dials firmly mounted to metal standoffs instead of the terrible rubber strip used on the very early units
13 - new caps in the PSU
14 - new trimmers
This item is sold As-Described
This item is sold As-Described and cannot be returned unless it arrives in a condition different from how it was described or photographed. Items must be returned in original, as-shipped condition with all original packaging.Learn More.
| Listed | 7 years ago |
|---|---|
| Condition | Very Good (Used) Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape.Learn more |
| Brand | |
| Model |
|
| Categories | |
| Year |
|
| Made In |
|
Product safety information may be available here.
