MANUNTA CLASSIC M2tech

INTEGRATED AMPLIFIER

OPEN FOR PHOTOS ONLY

OPERATION 110/220 VOLT

TECHNICAL SPECIFICATIONS:

The Classic Integrated Amplifier is a stereo integrated amplifier designed to form the heart of a Hi-Fi system. Simply add a source and a pair of speakers.

It accepts four high-end sources, such as DAC, CD player, tuner, recorder, and TV, including one with a balanced connection plus a turntable. The turntable input accepts both MM heads and MC heads and, if not used, can be turned into another high-level input simply by clicking on a switch placed on the back panel.

Drive a pair of speakers and a stereo headset. In addition, it features a preamplified output to drive an active subwoofer, or for a more powerful power end than the internal one, or to associate the internal end with a second end to implement passive speaker biamplification.

It features an infrared remote control and a WiFi interface through which it can be controlled from any smartphone thanks to the free app provided by M2Tech on Apple Store and Google Play.""

The Classic Integrated Amplifier is designed for music. Its power circuitry is structured to accommodate the dynamic behavior of the music program, consisting of a succession of short impulsive peaks interspersed with longer mid-low intervals. Think drums or singing. For this reason, with a continuous power deliverable of 60Wrms per channel over 8 Ohm and 100Wrms per channel over 4 Ohm, the Classic Integrated Amplifier is capable of delivering a dynamic power of as much as 155Wrms per channel over 8 Ohm and up to 240Wrms per channel over 4 Ohm! Simply put, the Classic Integrated Amplifier costs, consumes, and heats like a 50W amplifier but sounds like a 150W one. Not bad, right?

The Classic Integrated Amplifier is assembled with great care by hand in Italy, because at M2Tech we strongly believe in the added value of expert craftsmanship that gives product quality and dignity to the worker. It is made using only through hole mount components. They offer a greater variety of choice than surface-mount components. This allowed us to choose the most suitable components at the design stage based on sound and power resistance, because we wanted to make a product that sounded good and durable over time - an investment for life.

The Classic Integrated Amplifier is an ethical and environmentally friendly product. Mechanical components are made in Italy complying with European environmental regulations. Its power supply allows optimal use of the energy stored in it, its standby circuit consumes just over a tenth of a Watt. In compliance with the European Union’s recently issued repairability index regulations, the Classic Integrated Amplifier only uses components that are easily available and replaceable in the unlikely event of a failure, ensuring prolonged use over time.”

TECHNICAL SPECIFICATIONS:

Audio

Sensitivity:

230 mVrms (line inputs)

5 mVrms (MM phono input)

0.6 mVrms (MC phono input)

9-15 V (trigger)

Input impedance:

47 kOhm (single-ended and phono)

20 kOhm (balanced)

Signal/Noise Ratio:

105 dBA (60 Wrms over 8 Ohm Output Power, Line)

85 dBA (60 Wrms on 8 Ohm Output Power, MM Phono)

75 dBA (60 Wrms over 8 Ohm Output Power, MC Phono)

THD+N:

0.02% (1 kHz, 60Wrms over 8 Ohm output power)

Inputs and Outputs

Inputs:

1 phono MM / phono MC / line (RCA)

3 single-ended line (RCA)

1 balanced (XLR)

1 trigger (jack 3.5mm)

Output:

speakers (clamps)

preamp (RCA)

trigger (jack 3.5mm)

Dimensions and Weight

Dimensions:

420x313x120mm (LxDxH)

Weight:

net 15.0kg (including accessories)

gross 18.0 kg

Electric

Continuous output power before clipping:

60 Wrms per Channel (Stereo, 8 Ohm)

100 Wrms per Channel (Stereo, 4 Ohm)

Dynamic Output Power (10ms):

155 Wrms per Channel (Stereo, 8 Ohm)

240 Wrms per Channel (Stereo, 4 Ohm)

Dynamic headroom:

4.2dB (stereo, 8 Ohm and 4 Ohm)

Supply voltage:

110-130 VAC or 220-240 VAC, 50/60 Hz

Power consumption:

225 VA

0.1 VA (standby)