Crown PZM 6D BOUNDARY MICROPHONE

• Pressure Zone Microphone design prevents coloration from surface sound reflections
• Choice of flat response or rising high-frequency response
• PZM-6D is smaller, lighter, and has a permanently attached cable
• Hemispherical pickup pattern

Crown PZM-6D Boundary Microphone Specifications

• Type: Pressure Zone Microphone
• Transducer: Electret condenser
• Frequency Response (Typical): 20 Hz to 20,000 Hz
• Polar Pattern: Hemispherical when used on a floor, wall or ceiling
• Impedance: 240 ohms, balanced (recommended load impedance 1000 ohms or greater)
• Open-Circuit Sensitivity (Typical): 7 mV/Pa (43dB re 1 volt/Pa)
• Power Sensitivity: 43 dB re 1 mW/Pa. EIA sensitivity 135 dBm
• Signal to Noise Ratio: 74 dB at 94 dB SPL
• Maximum SPL: 150 dB SPL at 3% THD
• Operating Voltage: Phantom power, 12-48 volts DC on pins 2 and 3 with respect to pin 1
• Current Drain: 1.1 mA
• Cable: Permanently attached 15-foot (4.58-m) black cable with XLRM connector
• Switch: Frequency-response select switch for rising or flat response
• Color: Black
• Net Weight: 6.5 ounces (184 gm)
• Dimensions: 3 in x 2.5 in. x .375 in. (7.62 cm x 6.35 cm x .95 cm)