• 3-band parametric EQ
• Stereo, Dual-Mono and Mid/Side
• "Saturation core" technology for harmonically enriched EQ effects
• LED rings and digital rotary controls
• USB and network control
• Recall via supplied plug-in
• Bypass can be set independently for all 3 bands
• HF and LF cut controls with individual bypass controls
• Internal power supply unit
• 19" device with 2U installation height

The Cranborne Carnaby HE2 is an innovative stereo harmonic EQ that adds a new dimension to sound. It is based on the concept of the Carnaby 500, an EQ circuit that uses harmonic saturation to boost and cut frequencies. The Carnaby HE2 offers three interactive bands per channel, each creating a different type of harmonic to match the frequency band. This can add warmth, sparkle and character to audio sources, stems and mixes.

The Carnaby HE2 is not only an analog EQ, but also a digitally controlled device that can be remotely controlled and stored via network. With the Control Plugin, all parameters of the Carnaby HE2 can be conveniently set and called up from the DAW. The device's potentiometers are also surrounded by colored LED rings, which directly indicate the level at which the controller is currently set. The device can also be operated in mid/side mode to process the middle and sides of the stereo signal separately. The device takes care of the necessary encoding and decoding so that no additional M/S equipment is required. The Carnaby HE2 also has one insert per channel, which can be used to loop additional outboard hardware into the signal path.

The Carnaby HE2 is therefore a versatile and creative HarmonicEQ that gives User the ability to enhance music with true analogue saturation and the feel and control of an equalizer. It is ideal for mastering, mixing and sound design.

The low band is a bass filter that operates between 20 Hz and 420 Hz. It creates a second harmonic that gives the Bass more foundation and punch. The frequency and level of the low band can be adjusted using the corresponding controls. You can also choose between a shelf and bell filter to adjust the shape of the curve.

The mid band is a center filter that operates between 200 Hz and 6.2 kHz. It creates a third harmonic that gives the midrange more presence and clarity. Here too, the frequency and level of the band can be adjusted using the corresponding control. The mid band is a peaking filter with a fixed Q.

The high band is a treble filter that operates between 5 kHz and 25 kHz. It creates a fifth harmonic that gives the treble more air and brilliance. The high band is a shelf filter with a gentle slope and can be adjusted via a control.

• Hi Band:
  • Filter Type: High Shelf Filter
  • Frequency range: 5kHz - 25kHz
• Mid Band:
  • Filter Type: Peak Filter
  • Frequency range: 200Hz - 6.2kHz
• Lo Band:
  • Filter Type: Low Shelf Filter
  • Frequency range: 20Hz - 420Hz

• Low-pass filter:
  • Type: Progressive slope low-pass filter
  • Frequency range: -3db, 8kHz -40kHz
• High-pass filter:
  • Type: Progressive slope high-pass filter
  • Frequency range: -3db, 18Hz -180Hz

• Max. Input level: +26.0dBu ('0.003% THD)
• Max. Output level: +26.0 dBu ('0.003 % THD)
• Noise floor: '-93dBu all bands bridged
• Input impedance: Line = 10 kOhm
• Output impedance: Line = 150 Ohm
• Current consumption: 140mA per rail - idle, 160mA peak
• Dimensions (H x W x D): 8.9 x 48.3 x 23.6cm
• Weight: 6kg

• Inputs:
  • 2x XLR 3-pin (balanced)
  • 2x 6.35mm jack
• Outputs:
  • 2x XLR 3-pin (balanced)
  • 2x 6.35mm jack
• Channel insert send: 2x 6.35mm jack
• Channel insert return: 2x 6.35mm jack
• Network input (NET): RJ45
• USB: USB-C (only for software updates)