Electro-Harmonix Nano Bass Big Muff Fuzz Pedal

FREE shipping anywhere in the USA!

The Nano Bass Big Muff delivers that huge Bass Big Muff sound in a nano-sized package. With voicing inspired by the battle-tank green, Russian Big Muff and a classic Big Muff Pi layout of Sustain, Tone and Volume controls, it provides sounds ranging from a slight but satisfying grit to an over-the-top wall of bass fuzz.

Electro-Harmonix Nano Bass Big Muff Fuzz Pedal Specs: - Tailor your drive/distortion sound with Sustain, Tone and Volume knobs - Features a Dry switch that mixes your dry bass, at unity level, with the Nano Bass Big Muff’s distortion - True bypass for maximum signal path integrity - Road worthy die-cast chassis - 9Volt battery included - EHX 9.6DC-200 AC adaptor available Electro-Harmonix Nano Bass Big Muff Fuzz Pedal Controls:

- Sustain Knob — adjusts the amount of sustain and distortion.
- Tone Knob — provides a range of sounds from high treble to deep bass. As you turn the knob clockwise, treble increases and bass decreases.
- Vol Knob — sets the output level of the distortion effect. When the toggle switch is set to DRY, the volume knob has no effect on the output level of the dry signal.
- Dry Toggle Switch — when set to DRY mode, the original dry signal present at the input jack is mixed with the output of the distortion circuit. The level of the Dry signal is constant and will not change as you turn the Volume knob up or down allowing you to set the level of the distortion effect against your dry signal. Flip the DRY switch to the left, away from the DRY label, to mute the dry signal; now you will hear only Big Muff distortion.

The Nano Bass Big Muff is also true bypass, so bass players get the same great tone they've always had when the effect is disengaged.

Power: 9v battery or 9vDC power supply (100mA or more)