Franklin Audio SS-6 MKII - 6-Input Stereo Switcher & Passive DI

6 Stereo Inputs · 12 Mono Sources · Passive Stereo DI · Transformer Balanced XLR · Stereo Thru Outputs · Instant Switching · No Power Required

The Franklin Audio SS-6 MKII is a six-input stereo instrument switcher with a built-in passive DI, designed to solve a familiar studio problem: having a collection of synthesizers, drum machines, keyboards and guitars, but constantly reaching for the same few instruments because switching between them means unplugging cables and rearranging your setup.

Franklin Audio's solution is beautifully straightforward. Keep everything connected and choose what you want to play with a single rotary switch. No menus, no power supply and no unnecessary interruptions when inspiration strikes.

The SS-6 MKII accommodates six stereo sources or up to twelve mono instruments, making it particularly useful for studios with multiple synths, samplers, drum machines and other electronic instruments. Instead of dedicating a separate audio interface input to every piece of gear, you can leave everything patched in and select the instrument you want to record.

But this isn't just another passive input switcher. The SS-6 MKII also incorporates a high-quality stereo DI circuit built around Franklin Audio's custom FA-02 transformers.

The selected instrument passes through the transformers, converting its unbalanced signal into a balanced, low-impedance output suitable for microphone preamps, mixing consoles and recording equipment. This allows you to use your favourite mic preamps as part of the recording chain while keeping your instruments permanently connected.

It's an especially useful approach for synthesizers and drum machines. Rather than routing everything through a small mixer, with its additional active circuitry and gain stages, you can send the selected instrument directly through a clean, passive transformer-balanced signal path.

Franklin's custom transformers are designed to offer a wide frequency response, low distortion and enough headroom to handle a variety of instrument levels. The SS-6 MKII isn't intended to add obvious saturation or recreate the coloration of a particular vintage DI. Its job is to provide a clean, reliable connection while making the entire recording process more convenient.

The input configuration is flexible, too. Each stereo pair can accommodate a stereo instrument or two separate mono sources, one connected to the left channel and the other to the right. Just remember that the SS-6 is a switcher, not a mixer. Only one stereo input pair is selected at a time, so two mono instruments sharing that pair will be routed simultaneously to their respective outputs.

Another particularly useful feature is the pair of stereo THRU outputs.

These provide an unaffected copy of the selected instrument signal before it reaches the DI transformers. You can send this signal to an amplifier, pedalboard, monitoring setup or another processor while simultaneously recording the clean signal through the balanced XLR outputs.

For example, a guitar can be routed through the DI to capture a clean performance while the THRU output feeds an amplifier or effects chain. The same approach works with synthesizers, allowing you to record a direct signal alongside a separately processed version.

And in a studio full of instruments, the practical benefits add up quickly. No need to keep swapping cables, searching behind racks or leaving a mixer powered on just to choose between a few synths. Turn the selector and you're ready to record.

The MKII version updates Franklin Audio's original design with a heavy-duty 1.5 mm folded-steel enclosure, streamlined rear-panel connections and a desktop-friendly layout. Its completely passive architecture means there's no power adapter, battery or external supply to worry about.

Designed and handmade in Sydney, Australia, the SS-6 MKII also comes with a 10-year manufacturer's warranty.

It's not the most glamorous piece of studio equipment, and that's rather the point. The Franklin Audio SS-6 MKII doesn't generate sounds, offer endless presets or promise to transform your instruments. It simply makes them all available whenever you need them, so the next idea doesn't disappear while you're looking for a cable.

Find the Franklin Audio SS-6 MKII at One More Pedal.

Six stereo inputs, one knob, and one less excuse for leaving half your synth collection untouched.

Key features

  • Six-input stereo instrument switcher with integrated passive DI
  • 6 stereo inputs or up to 12 mono sources
  • Instant instrument selection using a single rotary control
  • Custom Franklin Audio FA-02 transformers
  • Balanced stereo XLR outputs for microphone preamps and mixing consoles
  • Stereo THRU outputs for parallel signal routing
  • Compatible with synthesizers, keyboards, drum machines, guitars and basses
  • Fully passive operation with no external power required
  • Allows simultaneous recording of direct and externally processed signals
  • Quiet switching between instruments
  • Supports both stereo and mono sources
  • Heavy-duty 1.5 mm folded-steel enclosure
  • Desktop-friendly design with rear-panel connections
  • Designed and handmade in Sydney, Australia
  • 10-year manufacturer's warranty

Controls & Connections

Top Panel

  • Input Selector: rotary control for selecting one of the six stereo input pairs.
  • Ground: switch for managing the ground connection and helping reduce potential noise issues.

Inputs

  • Stereo Inputs 1-6: six pairs of unbalanced 1/4" TS inputs for stereo instruments.
  • Mono Sources: supports up to twelve mono instruments distributed across the left and right channels.

Outputs

  • Left / Right XLR Outputs: transformer-balanced outputs for connecting to microphone preamps, mixing consoles or suitable recording equipment.
  • Left / Right THRU: unbalanced 1/4" outputs providing a copy of the selected signal before the DI transformers.

Technical specifications

  • Type: six-input stereo switcher with passive DI
  • Model: SS-6 MKII
  • Inputs: 6 stereo pairs / 12 mono sources
  • Input connectors: 1/4" TS, unbalanced
  • DI outputs: 2 balanced male XLR
  • THRU outputs: 2 unbalanced 1/4" TS
  • Transformers: custom Franklin Audio FA-02
  • Input impedance: 150 kΩ
  • Input impedance in mono-to-stereo configuration: 75 kΩ
  • Output impedance: 150 Ω
  • Maximum input level: +22 dBu
  • Frequency response: 20 Hz – 20 kHz (±0.2 dB)
  • Extended frequency response: 10 Hz – 50 kHz (±1 dB)
  • DI attenuation: -22 dB / -42 dB with PAD engaged
  • THD+N: 0.001% (1 kHz, +20 dBu)
  • Noise: below -105 dBV (150 Ω source, A-weighted)
  • Power requirements: passive, no power required
  • Enclosure: 1.5 mm folded steel
  • Enclosure dimensions: 165 × 95 × 68 mm
  • Dimensions including knobs and feet: 165 × 102 × 93 mm
  • Weight: 1.25 kg
  • Made in Sydney, Australia
  • Warranty: 10 years

Beworbene ähnliche Inserate













ZustandBrandneu (Neu)
Brandneue Artikel werden von autorisierten Händlern oder Herstellern verkauft und kommen in originaler Verpackung.Weitere Informationen
Marke
  • Franklin Audio
Modell
  • SS-6
Farbe
  • Nero
Kategorien
Jahr
  • 2026
Hergestellt in
  • Australien

Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.

Über den Verkäufer

ONE MORE PEDAL

Málaga, Spanien
Mitglied bei Reverb seit:2022

Reverb-Schutz

Einfache Rücksendungen, sichere Transaktionen, Support von Experten

Weitere Informationen

Sichere Zahlung

Reverb Gives

Mit deinen Käufen unterstützt du Programme zur Förderung Jugendlicher, damit sie das Equipment erhalten, das sie zum Musizieren brauchen.

Ups, sieht aus, als hättest du etwas vergessen. Bitte prüfe die rot hervorgehobenen Felder.