Bartolini RT5CX-B 5-String Original Bright RT Soapbar Neck Pickup

Bartolini RT5CX-B 5-String Original Bright RT Soapbar Neck Pickup

Refine and elevate your sound with the Original Bright Soapbars ? designed for bass players who want a brighter, more articulate voice while keeping the depth and punch that Bartolini pickups are known for. These pickups still deliver plenty of rich lows and powerful low-mids, but with a crisp high-end that cuts through the mix.

With a higher resonant frequency and a smoother peak, the Original Brights have a balanced output and a flatter frequency response. The enhanced treble introduces more phase shift at higher frequencies, adding complexity for an aggressive bite and growl. They are punchy and precise, delivering a modern tone that complements your bass?s natural voice. Prominent bass builders have long used the Original Bright voice, especially with an on-board preamp.

Structurally similar to our classic Original Soapbars, the Original Brights ensure clarity and definition in every note. Each pickup is fully shielded and sealed, making them resistant to sweat and noise from stage and studio environments. Shielded cables add extra protection for a flawless performance.Available in balanced versions for the neck (Bass, -B) and bridge (Treble, -T), the Original Bright Soapbars are your go-to choice for a modern, dynamic sound that stands out.

Specifications

• Coil Structure: Dual Parallel Humbucking
• Cable Type: 4-Conductor Cable with shield and bare drain
• Magnetic Circuit: Carbon steel, brass, and copper powered by ceramic (ferrite) magnets projected shallow for wide aperture. Neck coil South and Bridge coil North for both positions

RT5CX-B - Neck

• DC Resistance: ~2.6KΩ
• Resonant Frequency: ~6.1KHz
• Sensing Width: 2.83" [72mm] Max

RT5CX-T - Bridge

• DC Resistance: ~3.9KΩ
• Resonant Frequency: ~4.4KHz
• Sensing Width: 2.83"[72mm] Max

RT Soapbar

• 4.06" [103mm] Long, 1.17" [30mm] Wide, 0.72-0.82" [18.3-20.8mm] Thick + 0.15" [3.8mm] Cable
14" [356mm] Top Radius
• 2 holes on bass end and 1 on treble end for your #4 pan head screws

Please Note: Bartolini does not supply screws with their pickups. If you require pickup screws, we carry them on our pickup screws page.

Click Here for Pickup Screws.