Description

P-Bass® Original series pickups are your best choice for the biggest, fattest bottom end. No other pickup can deliver the warm, open lows the way these do. Ensuring that any unwanted "woof" is eliminated, the split coil blade keeps your sound tight and clear, all while delivering huge bass response. You'll never find lower tones produced with higher fidelity! Available in split (S) coil designs, you'll find all the depth of tone you need right here. If you are looking for bottomless bass, they're also available in our deep voicing (SU) incarnation. Original Barts bring out your voice, low and clear.

The original Bartolini design gives you the timeless tone that started it all – full and warm for that vintage voice you’ve been craving, enhancing the natural voice of your bass. These split coil pickups are hum-cancelling, so they are well suited for studio or stage. They have a blade core design, so you don’t have to worry about string alignment. Original Barts bring out your voice, low and clear.

In the early ‘70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate “microphonics” – the nasty noise you get when you touch typical pickups.

Technical Details Coil Structure:

Split P Hum-killing

Cable Type:

Shielded Coaxial Hot Core

Magnetic Circuit:

2 types of carbon steel powered by ceramic (ferrite) magnets projected shallow for wide aperture
Bass coil North and treble coil South

Coil Specs For 8S Model:

DC Resistance: ~8.4KΩ
Resonant Frequency: ~4.6KHz
Sensing Width: 2.36" [60mm] Max 1.57" [40mm] Min

Coil Specs For 8SU Model:

DC Resistance: ~6.2KΩ
Resonant Frequency: ~6.4 kHz
Sensing Width: 2.36" [60mm] Max 1.57" [40mm] Min

Shape Details

P-Bass
2.2" [55.9mm] Long
1.08" [27.4mm] Wide
0.69" [17.5mm] Thick + 0.11" [2.8mm] Cable
2 Standard P Pickup Mounting ears on each part for your #3 or #4 screws

Wiring Diagram

Reverb-Käuferschutz

Reverb hilft dir weiter, wenn dein Artikel verloren geht, beschädigt ist oder nicht der Beschreibung entspricht. Melde alle Probleme einfach innerhalb von 7 Tagen und wir verhelfen dir zu einer vollständigen Rückerstattung.Erfahre mehr über den Reverb-Käuferschutz.

ZustandBrandneu (Neu)
Brandneue Artikel werden von autorisierten Händlern oder Herstellern verkauft und kommen in originaler Verpackung.Weitere Informationen
Marke
Modell
  • BRP8S Original Bass Series 4-String P Bass Deep Tone Single Coil Pickup
Kategorien
Jahr
  • 2024
Hergestellt in
  • Vereinigte Staaten von Amerika

Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.

Über den Verkäufer

Rocket Music

Blacksburg, VA, Vereinigte Staaten von Amerika
Mitglied bei Reverb seit:2015

Reverb-Schutz

Einfache Rücksendungen, sichere Transaktionen, Support von Experten

Weitere Informationen

Sichere Zahlung

Beworbene ähnliche Inserate













Produktrezensionen

Reverb Gives

Mit deinen Käufen unterstützt du Programme zur Förderung Jugendlicher, damit sie das Equipment erhalten, das sie zum Musizieren brauchen.

Ups, sieht aus, als hättest du etwas vergessen. Bitte prüfe die rot hervorgehobenen Felder.