TEAC X-2000R, Professionally Serviced Open Reel Stereo Tape Deck TASCAM
Price€2,608.10
+ €698.60 Shipping
This listing has ended
See similar gear from other Reverb sellers
Listed:6 years ago
Views:956
Saves:12
Offers:0
Andover, MA, United States
Our users rate Reverb
The ultimate TEAC open reel recorder; the last model produced, and
widely regarded as the finest. This example has been professionally
repaired and is functioning perfectly in all aspects. Cosmetically good,
with no significant issues. Whether you use it for mastering or hifi,
this unit is ready for plenty more great music.
The X-2000R was the top of the line reel to reel model made by Teac. 4 tracks, 2 channels, plays quarter inch wide tape and can play 7" and 10.5" reels.
It has 6 heads (cobalt amorphous record and playback), fully bi-directional, 3 motors and dual capstan drive system (belt driven).
Two speeds, 7.5 ips (19 cm/s) and 3.75 ips (9.5 cm/s), electronic real time counter (hour, minutes and seconds) and full tension servo control, which means that you can use any size of reel without adjusting the tension manually by a switch.
It's one of the few machines that has a built-in decoder/encoder dbx type I professional noise reduction system.
The transport function is computerized and includes return-to-zero, return-to-cue, program, repeat, set-cue and other features. Owner's manual is available via google search.
Ships worldwide . Quoted international shipping estimate is for shipping to Australia, the furthest destination from my location in the USA. Please inquire for a shipping quote to your specific international location. Local pickup can also be arranged.
Notes from the technician:
Resurface pinch rollers Clean and lube
Free up frozen roller mechanism
Clean all controls
Test speeds and tension
Test play and record in both directions
Repair cold solder on fuse board
Replace fuses
New belt
Clean and reset tape path
Demagnetize heads
From the owner's manual:
Description
The X-2000R incorporates a variety of functions and features including dbx noise reduction, an auto-locator function which is convenient in replay and editing and block-repeat.
To maintain very stable tape motion with optimum tape tension, it uses a full tension servo control system in which a photo-interrupter senses the position of the tension arm so that the servo mechanism can adjust the torque of the reel motor.
This mechanism eliminates the need for manual switching when using different types of reels.
In the design of the electronic circuits the same concepts were applied, especially for the high level recording required by professionals.
Specifications
Track system: auto reverse, 4-track, 2-channel, stereo/monaural system
Heads: 2 x playback, 2 x record, 2 x erase
Motor: 2 x reel, 1 x capstan
Reel size: up to 10.5 inch reel
Tape speeds: 3 3⁄4 7 1⁄2 ips
Wow and flutter: 0.03% (7 1⁄2 ips)
Frequency response: 30Hz to 40kHz (7 1⁄2 ips)
Signal to Noise Ratio: 63dB
Total harmonic distortion: 0.8%
Input: 60mV (line), 0.25mV (mic)
Output: 0.45V (line)
The X-2000R was the top of the line reel to reel model made by Teac. 4 tracks, 2 channels, plays quarter inch wide tape and can play 7" and 10.5" reels.
It has 6 heads (cobalt amorphous record and playback), fully bi-directional, 3 motors and dual capstan drive system (belt driven).
Two speeds, 7.5 ips (19 cm/s) and 3.75 ips (9.5 cm/s), electronic real time counter (hour, minutes and seconds) and full tension servo control, which means that you can use any size of reel without adjusting the tension manually by a switch.
It's one of the few machines that has a built-in decoder/encoder dbx type I professional noise reduction system.
The transport function is computerized and includes return-to-zero, return-to-cue, program, repeat, set-cue and other features. Owner's manual is available via google search.
Ships worldwide . Quoted international shipping estimate is for shipping to Australia, the furthest destination from my location in the USA. Please inquire for a shipping quote to your specific international location. Local pickup can also be arranged.
Notes from the technician:
Resurface pinch rollers Clean and lube
Free up frozen roller mechanism
Clean all controls
Test speeds and tension
Test play and record in both directions
Repair cold solder on fuse board
Replace fuses
New belt
Clean and reset tape path
Demagnetize heads
From the owner's manual:
Description
The X-2000R incorporates a variety of functions and features including dbx noise reduction, an auto-locator function which is convenient in replay and editing and block-repeat.
To maintain very stable tape motion with optimum tape tension, it uses a full tension servo control system in which a photo-interrupter senses the position of the tension arm so that the servo mechanism can adjust the torque of the reel motor.
This mechanism eliminates the need for manual switching when using different types of reels.
In the design of the electronic circuits the same concepts were applied, especially for the high level recording required by professionals.
Specifications
Track system: auto reverse, 4-track, 2-channel, stereo/monaural system
Heads: 2 x playback, 2 x record, 2 x erase
Motor: 2 x reel, 1 x capstan
Reel size: up to 10.5 inch reel
Tape speeds: 3 3⁄4 7 1⁄2 ips
Wow and flutter: 0.03% (7 1⁄2 ips)
Frequency response: 30Hz to 40kHz (7 1⁄2 ips)
Signal to Noise Ratio: 63dB
Total harmonic distortion: 0.8%
Input: 60mV (line), 0.25mV (mic)
Output: 0.45V (line)
| Listed | 6 years ago |
|---|---|
| Condition | Very Good (Used) Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape.Learn more |
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Made In |
|
Product safety information may be available here.