The new Mc2 Audio Delta 20 4 Channel Amplifier

Within thiis 1U chassis, the amplifier also features individual 70/100V line drive, an auto standby power mode (with wake-up <200mS), tuneable fans adaptable to different level/performance scenarios, and GPIO for remote control and monitoring. The amplifier inputs as on the Delta 40, and has PFC enabled universal mains supply for worldwide use.

A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs.

Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier.

Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.

All MC² Audio products are covered by a 5 year warranty.

Dante Network Card Optional. Message for costs

Number of channels       4

Output Power: (per channel)

8 ohms 175W

4 ohms 350W

2.7 ohms             480W

50 ohms (100/70V line)   200W

Output Power: (bridged)

8 ohms 700W

4 ohms 660W

THD%: (@1dB below max output)

@ 1kHz < 0.01%

20Hz to 20kHz   < 0.03%

Gain / Sensitivity:

Gain       26dB

Sensitivity (for max power)           8.3dBu 

Frequency Response:       20Hz to 20kHz

(+ 0/- 0.3dB)

Power Consumption: (< 5W in standby)

Nominal @ 240v into 4 ohms       0.74A

Nominal @ 120v into 4 ohms       1.53A

Dimensions: (1U) (mm)

Amplifier             44(h) x 482(w) x 428(d)

Single Box (UK shipping) 100 x 580 x 590

Double Box (outside UK) 140 x 610 x 600

Weight:

Amplifier             5.1kg (w/o 100V/70 TX)

Boxed (shipping weight) 5.9kg