Tokai Hard Puncher TPB-50 is a Japanese bass guitar, manufactured in 1984 at the Tokai Gakki factory. The instrument is a replica of the 1962 PB model, which is reflected, among other things, by the use of a Fender-style logo typical for that period (instead of the standard Tokai mark). This unit is finished in Candy Apple Red and equipped with a rosewood fingerboard. After our service work, which included fingerboard leveling, refretting, electronics replacement, and cavity shielding, the bass is ready to play.

Technical specification

  • Manufacturer: Tokai
  • Model: Hard Puncher TPB-50
  • Year of production: 1984
  • Body: Alder
  • Neck: Maple
  • Fingerboard: Rosewood
  • Frets: Medium Jumbo (Condition: 100% – new)
  • Pickups: 1x Tokai Split-Coil
  • Electronics: Passive (new potentiometers and wiring)
  • Visual condition: Very good (details in description)
  • Finish: Candy Apple Red
  • Weight: 3.99 kg / 8.80 lbs

Body and construction The solid body is made of alder. The instrument features a lacquer finish in Candy Apple Red. A traditional Bolt-on construction with a classic neck joint is used. In our workshop, the electronics cavities were completely shielded with copper foil. The lacquer coating went through a cleaning and waxing process.

Neck and ergonomics The maple neck features an original profile defined by Tokai designers, differing from a strict replica of 1962 necks. The neck is paired with a rosewood fingerboard with a 7.25" radius. As part of the service work, the old frets were removed, the fingerboard was leveled, and brand new Medium Jumbo size frets were installed. A new nut made of natural bone was also fitted. The fingerboard surface was cleaned and conditioned.

Sound The instrument is equipped with a factory Tokai Split-Coil pickup in a passive circuit.

  • Characteristics: The combination of an alder body and a split-coil pickup generates a frequency response with clear mids and a controlled, dynamic bottom end.
  • Dynamics: The passive electronics, based on entirely new potentiometers and wiring, respond directly to articulation strength. The applied shielding lowers the circuit's susceptibility to noise and external electromagnetic interference.

Additional information

The TPB-50 model is heavily inspired by the 1962 specification, which is confirmed by the use of a Fender-style logo font from that period on the headstock, differing from Tokai's typical graphic mark.

The "L" prefix found in the serial numbers of these models is a historical nod by the Japanese manufacturer to the American originals from 1963–1965.

Despite its visual faithfulness to the '62 vintage, the neck of the instrument features an original "Tokai" profile, providing a different feel in the hand than standard reissues.

The service work we performed included: fingerboard leveling, complete refretting, crafting a bone nut, replacing potentiometers and wiring, and full copper shielding of the electronics cavities.

Hardware

  • Bridge: Vintage Style Spiral Saddle – a steel construction equipped with threaded (spiral) saddles, which is consistent with the historical specification of the 1962 originals.
  • Tuners: Reverse Vintage Style – open-back mechanisms with a reverse tuning direction. The hardware went through a revitalization process and retains its mechanical efficiency.

Instrument condition

  • Technical condition: The instrument is mechanically and electronically functional after a luthier verification. The truss rod works properly, and the frets are brand new.
  • Visual condition: The guitar is preserved in very good visual condition. Minor scratches are visible on the lacquer (mostly noticeable against the light), and the hardware features a natural patina appropriate for the year 1984. The instrument has no structural wood cracks.
  • Setup and Modifications: A complete refretting (Medium Jumbo), fingerboard leveling, electronics replacement (potentiometers, wires), copper cavity shielding, crafting a bone nut, and a setup of the string action were performed.

Why choose this instrument

  • '62 Specification: The use of spiral saddles in the bridge, reverse tuners, and a Fender-style logo are historical details valued by collectors.
  • Tokai neck profile: The neck offers the Japanese factory's original ergonomics, providing an interesting alternative to standard vintage profiles.
  • New frets and leveling: The complete fret replacement (Medium Jumbo) and fingerboard leveling eliminate the wear resulting from use and improve playing comfort.
  • Modernized electronics: The replacement of outdated potentiometers and wires, along with the application of full shielding, guarantee quiet, noise-free operation.

Questo articolo è venduto "Come da descrizione”

Questo articolo è venduto "Come da descrizione" e non può essere restituito a meno che non arrivi in condizioni diverse da come è stato descritto o fotografato. Gli articoli devono essere restituiti nelle condizioni originali in cui sono stati spediti, con tutti gli imballi originali.Scopri di più.

Annunci simili in promozione













Pubblicato4 giorni fa
CondizioneMolto buono (Usato)
Gli articoli "Molto buoni" possono mostrare qualche piccolo segno o graffio ma sono pienamente funzionali e in buone condizioni generali.Scopri di più
Marchio
Modello
  • Hard Puncher TPB50
Finish
  • Candy Apple Red
Categorie
Anno
  • 1984
Prodotto in
  • Giappone
Destrimani/Mancini
  • Per destrimani
Numero di corde
  • 4 corde

Le informazioni sulla sicurezza del prodotto sono disponibili qui.

Informazioni sul venditore

Selected Vintage Guitars

Poznań, Polonia
Iscrizione a Reverb::2025

Protezione di Reverb

Resi semplici, transazioni sicure, assistenza di persone in carne e ossa

Scopri di più

Checkout sicuro

Reverb Gives

Con i tuoi acquisti dai un contributo ai programmi musicali rivolti ai giovani, aiutandoli a ricevere gli strumenti di cui hanno bisogno.

Ops, forse hai dimenticato qualcosa. Verifica i campi evidenziati in rosso.