Toronto, Kanada
Zu diesem Inserat
The Universal Audio 1176LN Classic Limiting Amplifier is a hand-built reissue of the FET limiter Bill Putnam Sr. introduced in 1967. UA based it on the C, D and E revisions of the blackface 1176LN, with a Class A line-level output amplifier and a custom output transformer built to Putnam's original design. Engineers use it on vocals, bass, guitars and drums, and some run audio through it with the compression off just for the tone its amplifiers and transformer add.
Attack, Release and Ratio
Attack is adjustable from 20 to 800 microseconds and release from 50 milliseconds to 1.1 seconds. Four push buttons select ratios of 4:1 and 8:1 for compression, and 12:1 and 20:1 for limiting. The meter shows gain reduction or output level.
All Buttons In
Pressing all four ratio buttons at once gives the 1176's best-known setting. Distortion rises, the compression curve flattens and the unit lags behind the first transients. UA suggests it for drum room mics, for fuzzing out bass or electric guitar, and for pushing a vocal to the front of a mix.
Built in Santa Cruz
UA staff hand-build and test each unit at the UA Custom Shop in Santa Cruz, California. Two 1176LN units link for stereo through the optional 1176-SA Stereo Adapter, and audio connects on XLR or a barrier terminal strip.
Features
Hand-built reissue of the 1176LN, based on the blackface C, D and E revisions
FET compression with attack from 20 to 800 microseconds
Ratio buttons for 4:1, 8:1, 12:1 and 20:1, plus all-buttons-in operation
Class A line-level output amplifier
Custom Putnam-designed output transformer
Stereo linking of two units with the optional 1176-SA
XLR and barrier strip audio connections
115 V or 230 V switchable power
Specifications
Type: FET compressor and limiter, 2U rackmount
Frequency response: 20 Hz to 20 kHz, ±1 dB
Total harmonic distortion: Less than 0.5%, 50 Hz to 15 kHz with limiting, at 1.1 second release and +22.5 dBu output
Signal-to-noise ratio: Greater than 81 dB, 30 Hz to 18 kHz, input at threshold of limiting
Maximum input level: +30 dBu
Input impedance: 600 ohms, bridged T-control, floating
Maximum output level: +24 dBu
Output impedance: 600 ohms, transformer-balanced, floating
Gain: 45 dB, ±1 dB
Attack time: 20 to 800 microseconds
Release time: 50 milliseconds to 1.1 seconds
Ratios: 4:1, 8:1, 12:1, 20:1
Audio connectors: XLR and barrier terminal strip
Stereo linking: Two units via the optional 1176-SA
Power: 115 V or 230 V, switchable; 13 W maximum; standard detachable IEC inlet
Meter: dB gain reduction and dB output
Dimensions (W x H x D): 19 x 3.5 x 12.25 in
Weight: 11 lb (unit), 14.5 lb (shipping)
PreisC$4,149
Versandkostenfrei
Versandkostenfrei
von Toronto, Kanada
14 Tage Rückgaberecht
Genieße Sorgenfreiheit mit deinem neuen Equipment




