Dorval, Canada
About this listing
Shipping Policy: Please note that we currently ship within Canada only. Offers and orders from outside Canada will not be accepted.
Guard your electronic equipment, charge your mobile device, and light up your rack with the Radial Engineering Power-2 rackmount surge suppressor and power conditioner. Awarded Best in Show at NAMM 2020, Power-2 offers a sliding multicolor LED tray and nine outlets—one always-on outlet in front and eight switched outlets on the rear—protected against harmful power surges by the USA-made Metal Oxide Varistor.
With steel construction and robust components, Power-2 is ready for the challenges of constant sessions and live gigs. Plus, it yields low system noise while keeping radio-frequency interference out. Occupying just 1 RU of rack space, Power-2 is an ideal addition to gear racks used by studio operators, musicians, engineers, and producers.
LED Illumination
A tray slides out to illuminate rack equipment below, with ultrabright LEDs in seven color options along with a built-in dimmer to adjust as needed.
Unswitched Front-Panel Outlet
The single front-panel outlet will supply power even when the device is switched off, allowing you to easily connect and charge devices without powering on the entire rack.
Switched Rear-Panel Outlets
Eight rear-panel outlets are activated via the backlit power switch. Four of the eight outlets offer ample spacing for wall warts.
USB Charging Port
Also on the front panel is a 5V/1A USB Type-A charging port for mobile devices such as smartphones and tablets.
Fault Protection Indicator
An LED illuminates when the Power-2's USA-made Metal Oxide Varistor (MOV) is actively working. The MOV is designed to provide continuous protection for your equipment against varying resistance and high-voltage spikes from the AC main power source.
Noise Filtering
Power-2 utilizes shunt-mode technology and is non ground contaminating for lower system noise. A high-rejection RF interference filter is used to keep high frequencies and AM radio signals out of the power line, preventing contamination of audio signals.
Built Tough
A heavy-duty power on/off switch, rugged outlet connectors, and steel construction ensure that the Power-2 performs night after night without fail.
Features
8 Rear Outlets, 4 with Wall-Wart Spacing
1 Front Outlet
LED Tray with Color and Dim Controls
USB Charging for Personal Devices
USA-Made MOV for Surge Protection
High-Rejection RF Interference Filter
LED Indicator for Active Protection
Illuminated Power Switch
Rugged, Tour-Ready Construction
Specifications
Type
Conditioner / Surge Suppressor
Amp Rating
15 A
Number of Circuits
1
Metering
None
Battery Backup
No
Integrated Lamps
Yes, 1x Pull-Out (Front Panel)
Connections
Outlets
1x NEMA 5-15R (Front Panel, Unswitched, 1 Block-Sized)8x NEMA 5-15R (Rear Panel, Switched, 4 Block-Sized)
AC Power I/O
1x Hardwired Input
Lamp I/O
No
Additional I/O
1x USB-A
Wireless
No
Electrical
AC Input Power
120 VAC, 50 / 60 Hz
Load Capacity
Not Specified by Manufacturer
Sequencing Delay
No
USB Output
5 V, 1 A
Protection & Conditioning
Protection Types & Modes
Overvoltage, Metal-Oxide Varistor (MOV), EMI Filter
Circuit Breaker
Yes, at 15 A with Push-Button Reset
Undervoltage Protection
No
Clamping Voltage
130 V at 15 A (Line to Neutral)
Maximum Spike Current
20,000 A
Surge Protection
210 Joules
Transformer Isolated
No
EMI/RFI Noise Filtration
Common-Mode:10 dB (100 kHz)41 dB (1 MHz)50 dB (10 MHz)Traverse/Differential-Mode:19 dB (100 kHz)41 dB (1 MHz)42 dB (10 MHz)
Environmental
Certifications
CSA, UL
Operating Temperature
37 to 72°F / 5 to 40°C
Physical
Rackmount Size
1 RU (with Included Hardware)
Cable Length
9' / 2.7 m
Wire Gauge
14 AWG
Material of Construction
Steel
Cable Management
No
Dimensions
19 x 6.38 x 1.47" / 48.3 x 16.21 x 3.73 cm
Packaging Info
Package Weight
12.42 lb
Box Dimensions (LxWxH)
22.7 x 14.2 x 4.6"
Original PriceC$239.99
44% price drop
New PriceC$134.99
