Garden Grove, CA, United States
About this listing
Pioneer SX-1010 AM/FM Stereo Receiver – Wood Case – Restored – 1-Year WarrantyProfessionally Restored by HQaudios - Inspected & Tested - Backed by Our 1-Year WarrantyKEY HIGHLIGHTSPioneer SX-1010 classic AM/FM stereo receiverFactory-rated 100 watts per channel into 8 ohmsDirect-coupled stereo amplifier designDual phono inputs, AUX, tape, and microphone connectionsClassic silver-finish front panel with illuminated tuning dial and metersWood case handcrafted by HQaudiosProfessionally inspected and serviced by HQaudiosBacked by our 1-Year HQaudios WarrantyPRODUCT OVERVIEWThe Pioneer SX-1010 is a substantial 1970s AM/FM stereo receiver featuring a direct-coupled two-channel power amplifier and a comprehensive selection of analog audio connections.With its classic silver-finish front panel, illuminated tuning display, and extensive tone and source controls, the SX-1010 represents the high-powered receiver designs of Pioneer's classic era.Its powerful amplification and flexible connectivity make it suitable for traditional two-channel stereo systems, including turntables, tape decks, and modern line-level audio sources.This example is presented with a wood case handcrafted by HQaudios.HQAUDIOS RESTORATION & TESTINGProfessionally inspected, tested, and serviced. Aging or degraded components have been replaced where necessary to restore performance as close as possible to original factory specifications.Before RestorationWe received this vintage Pioneer SX-1010 for technical inspection and service, with particular attention to its power supply, amplifier circuitry, and associated electronic components.During RestorationCapacitors: We tested and measured capacitors; out-of-spec units were replaced with quality, correct-value components.Power Amplifier Board: We inspected and serviced the power-amplifier section.Circuit Boards: We thoroughly cleaned and inspected the circuit boards and reinforced weak solder joints.Bias & DC Offset: We measured and adjusted both to Pioneer factory specifications.Lighting: We replaced the dial and meter lamps with new lighting components.Switches & Controls: We cleaned and serviced the source selectors, volume, balance, and tone controls for smooth, stable operation.Input/Output Jacks: We inspected and cleaned the signal connections.FM Tuner Section: We checked and serviced the FM tuner section.Phono Stage: We tested the phono circuit for proper gain and channel balance.Wood Case: We fitted a new wood case handcrafted by HQaudios.After Restoration / Final TestingBurn-In Test: We completed the standard 72-hour burn-in test to verify performance and stability.Functional Testing: We tested the inputs, outputs, tone controls, and speaker-system switching.FM & Phono Testing: FM tuner and phono functions were included in our standard functional testing.CONDITIONTechnical ConditionAmplifier: The two-channel amplifier signal path has undergone HQaudios functional checks.Source Selection: The analog source-selection and switching functions were serviced.Controls: Volume, balance, and tone controls were cleaned and serviced.Cosmetic ConditionFaceplate: Classic silver-finish front panel with Pioneer control labeling and black tuning window.Wood Case: Wood-grain case handcrafted by HQaudios. Minor dark surface marks are visible on the photographed side panel.Overall Appearance: Vintage Pioneer presentation with a silver front panel and wood case. Please review the actual product photographs carefully for exact cosmetic details and remaining signs of age.QC SummaryStandard functional QC completedBurn-in testing completedControls and switching functions servicedSPECIFICATIONSBrand: PioneerModel: SX-1010Type: AM/FM Stereo ReceiverContinuous Power Output: 100 watts per channel into 8 ohms, both channels driven, 20 Hz–20 kHzTotal Harmonic Distortion: Less than 0.1% at rated continuous outputAmplifier Frequency Response: 7 Hz–100 kHz (factory specification)Phono Inputs: Phono 1 and Phono 2 (moving-magnet)Audio Inputs: Phono 1/2, AUX, tape playback 1/2, microphone, power amplifier inputAudio Outputs: Tape recording, preamplifier output, headphonesSpeaker Systems: A, B, and CSpeaker Impedance: 4–16 ohms (factory rating)Tuner Bands: FM / AMFactory Chassis Dimensions: 20.5 W × 6.9 H × 17.3 D inchesFactory Product Weight: 48.9 lbsWHAT IS INCLUDED1 × Pioneer SX-1010 AM/FM Stereo Receiver1 × Wood case handcrafted by HQaudiosOnly the items specifically listed above are included.SHIPPING & PACKAGINGYour vintage audio equipment will be professionally packed by HQaudios using protective materials appropriate for its size, weight, and construction.Large or heavy items may be palletized and shipped by freight when required for safer transportation.Please contact us before purchase for the most current availability information.1-YEAR WARRANTY & CUSTOMER SUPPORTYour purchase is backed by our 1-Year HQaudios Warranty.Our team provides support before and after your purchase. If you have questions about setup, operation, compatibility, or your order, please contact HQaudios for assistance.MORE FROM HQAUDIOSNeed restoration, repair, a custom faceplate or wood case, speaker stands, or a trade-in option?Contact HQaudios for available services and package pricing.
Price$2,999
Free Shipping
Free Shipping
from Garden Grove, CA
30-Day Return Policy
Enjoy peace of mind with your new gear




