Brisbane, Australia
About this listing
Hotone Ampero II Stomp Portable Multi-FX Modeller Pedal
Upgrade is more than a 7-letter word. It embodies the continuation and evolvement beneath the surface, and embraces revolution and creativity outside the box. It’s what Ampero II Stomp does.
Ampero is more than a series. Since launched, the Ampero series has earned a reputation for sound performance and user interface design.
In the past, digital multi effects were often criticized for producing a dull, lifeless sound. The goal here is to sound authentic—like what you would perceive from a real amplifier—using Hotone’s CDCM HD + F.I.R.E modeling technology.
Ampero II Stomp implements the tri-core digital platform and independent AD/DA from ESS Sabre Series, combined with CDCM HD and F.I.R.E modeling technology for more musically dynamic and vivid tones.
Dual Effects Chain
Ampero II Stomp introduces a highly customizable dual effects chain supporting multiple serial/parallel signal routing. Up to 12 effects modules can be used simultaneously.
8-in/8-out USB Audio Interface
With the 8-in/8-out USB audio interface function, you can monitor wet and record dry, record wet and dry at the same time, and reamp.
Glossy Touchscreen, Smoother Navigation
Ampero II Stomp features a touchscreen and an updated UI for easier editing of settings and switching patches.
Improved IR Performance (Celestion)
Ampero II Stomp supports up to 2048 IR sampling points (doubled from the previous generation). It reproduces captured cabinets and studio acoustics with precision. It also includes 20 classic Celestion speaker IRs powered by Celestion Digital, plus 50 additional custom IR slots.
Effects Library
● 87 amp models
● 68 cab models
● More precise cabinet-mic algorithm based on realistic studio recording data
● New preamp models
● Independent power amp simulation
● 100+ legendary pedal models
● 60+ Hotone original effects covering high quality distortion, dynamic, filter, modulation, delay and reverb, etc.
60-Second Stereo Looper
A built-in stereo looper supports max. 60 seconds stereo recording, with functions such as undo/redo, 1/2 speed, reverse record/play and more.
Compatible Win/Mac Software
Connect to your desktop or laptop and launch the editor software for more specific effects descriptions, more straightforward patch editing, and more effective patch management.
Lighter Design
The shape of Ampero II Stomp is designed to fit as a stompbox on a pedalboard matrix. It balances portability and practicality.
Richer I/O Jacks
Hello, Stereo In/Out. Pair up with more instruments/pedals/amps. Stereo FX Loop jacks provide additional routing/tonal possibilities. EXP/CTRL and MIDI In/Out offer expanded control options.
Application Scenarios
Connect to the Input of amps
Connect the output of Ampero II Stomp to the input of your amp, like using an effect pedal. You can also use external controllers or other pedals via the FX loop if needed.
Connect to the FX Loop Return of amps or the Input of pure post-stage power amps
When connecting to power amps, you can adjust Ampero II Stomp parameters like a real amp. When connecting to an FX Loop Return jack on certain guitar amps, use the specially designed PRE AMP modules for maximum enjoyment.
Using with other stompbox effect pedals
Place Ampero II Stomp on your pedalboard. Set the bypass mode or FX loop depending on your needs, then use it alongside your other pedals.
Connect to full-range audio devices such as mixing consoles, audio interfaces and headphones
Ideal tones can be used for home practice or live gigs.
Connect to your desktop/laptop as an audio interface
Connect the USB jack to your computer, connect monitors, and use the software and driver settings. Your mini music studio is ready.
Using the Aux In Jack
Use an AUX cable and connect Ampero II Stomp to your smartphone or music player. Practice and improvise with backing tracks or a metronome.
Comparison
Features
Second Generation amp modeler and effects processor with a pedalboard-friendly case
Fits any pedalboard matrix when used as an effect pedal
Enhanced Ampero sound quality via tri-core DSP platform and ESS Sabre AD/DA
Evolved CDCM HD and F.I.R.E modeling system for high end tonal expressiveness and realistic playing experience
24-bit signal processing, up to 127 dB dynamic range*
4-inch 800 x 480 dynamic touchscreen and newly designed UI
Highly customizable dual effect chain with multiple serial/parallel signal routing support
Add any effect module you like to the effect chain
Stereo I/O jacks and stereo FX loop jacks for further routing/tonal possibilities
Up to 12 simultaneous effects modules
Upgraded effects library delivers 400+ effects
CDCM HD and F.I.R.E modeling effects include:
87 amp models
68 cab models
More precise cabinet-mic algorithm based on realistic studio recording data
New preamp models
Independent power amp simulation
100+ legendary pedal models
60+ Hotone original effects (incl. drive/dynamic/filter/modulation/delay/reverb and more)
Dedicated IR loader module with 3rd party IR support, up to 50 custom IR slots
20 classic Celestion speaker IRs included (Powered by Celestion Digital)
Supports up to 2048 IR sampling points
USB port for firmware upgrading and for loading/editing/managing effects and IRs via free Win/Mac software (also usable as a USB audio interface)
8-in, 8-out USB audio interface
Supports Reamp function
Ampero-style acoustic effects and presets
Ampero-style input mode selections
300 presets (100 banks x 3 patches)
Built-in stereo looper with max. 60 seconds recording time and undo/redo function
3 assignable footswitches with halo LEDs
Customizable main display modes and theme colors
Authentic stereo processing
MIDI I/O jacks and EXP/CTRL jack for expanded controls
Road-ready, light-weight aluminum casing
9–18V DC power supply
*Digital to analog; actual data may vary depending on usage scenarios.
The mentioned manufacturer and product names are trademarks or registered trademarks of their respective owners. The trademarks were used merely to identify the sound character/features of the products.
Specifications
Effects DSP
24-bit depth, 44.1 kHz sample rate
Frequency Response
20 Hz – 20 kHz ± 1 dB
Dynamic Range
Max. 127 dB (digital to analog)
Effects Count
460 (incl. global EQ)
No. of Effect Modules
16
Effects Slots
Total of 12 simultaneous effects slots
Patches
300
Looper Time
Stereo 60 seconds
Inputs
Two 1/4″ Tip Sleeve (TS) instrument jacks with individual input mode selector
One 1/8″ Stereo Auxiliary In (Aux In) jack
One 1/4″ Tip Ring Sleeve (TRS) expression pedal/momentary footswitch input (EXP/CTRL) jack
One 1/4″ Tip Ring Sleeve (TRS) unbalanced stereo FX loop return jack
One standard 5-pin MIDI input jack
Outputs
Two 1/4″ Tip Ring Sleeve (TRS) balanced stereo output jacks
One 1/4″ Tip Ring Sleeve (TRS) unbalanced stereo FX loop send jack
One 1/8″ stereo headphones output jack
One standard 5-pin MIDI output jack
Input Impedance
Input: E.GT: 1 MΩ; A.GT: 4.7 MΩ; LINE: 10 kΩ
FX Loop Return: 100 kΩ
Aux In: 10 kΩ
Output Impedance
Output: 1 kΩ
FX Loop Send: 1 kΩ
Headphones: 47 Ω
Input Level
Input: -17.78 dBu (nominal); 14.5 dBu (max)
FX Loop Return: -17.78 dBu (nominal); 14.5 dBu (max)
Aux In: -17.78 dBu (nominal); 20 dBu (max)
Output Level
Output: -11.76 dBu (nominal); 26.25 dBu (max)
FX Loop Send: -17.78 dBu (nominal); 14.5 dBu (max)
Headphones: -7.4 dBu (nominal); 18.3 dBu (max)
Screen
4″ 800 x 480 color dynamic display touch screen
USB Port
USB 2.0 Type-C port, supports USB Audio 2.0
IR Processing
Supports 24-bit/44.1 kHz mono WAV files
Supports 1024 and 2048 points
Supports up to 50 user IRs
Power Requirements
9–18V DC center negative
Current Consumption
800 mA max (9 V DC)
Dimensions
185 mm (W) × 145 mm (D) × 58 mm (H)
Weight
1050 g
Original PriceA$917
32% price drop
New PriceA$628
Free Shipping
Free Shipping
from Brisbane, Australia
14-Day Return Policy
Enjoy peace of mind with your new gear
