Newtown, Australia
About this listing
Starla is a synthesis of two precisely combined electronics. It is a
superb sound quality analog tremolo controlled by a versatile digital
tap tempo microprocessor via optical technology – a light source and
photocell.
FEATURES:
DepthOn
minimum settings, Starla can be used as a signal booster. Increasing
the depth control, increases the tremolo effect in your signal; from
light shimmering, through mild transparent-traditional, all the way to a
deep swings and ‘machine gun-like’ sounds. Thanks to a huge depth
range, this tremolo is able to chop up any signal sent in or out of it.
It is very useful when put in front of high gain amps or pedals as it
can cut the sound down to a dead silence.
SpeedThere are 3 ways to set the
speed of the tremolo effect: by using a speed knob, tap tempo footswitch
or control voltage/remote tap switch via Sync port. Speed is affected
by the position of the Multiplier (1/3/2) toggle switch. If the
Multiplier switch is set at a higher rate, speed knobs sweep will change
as well.
WaveformStarla utilizes eight
different waveforms, including a random one. Combining every waveform
with Duty trim potentiometer produces numerous wave shapes for you to
explore. Duty trimmer pot modifies the duty cycle of all waveforms
except Random.
VolumeWe added volume control for
two reasons: first to avoid a noticeable drop in volume when effect is
engaged, which is a problem most tremolos have, and second to be able to
use Starla as an excellent volume booster without adding any distortion
to the signal when Depth control is on minimum setting.
Sync portThis port allows Starla to
communicate with other devices. Depending on how the internal jumper is
set up (remove the backplate to reach the jumper), Starla can send
control signal to synchronize other devices to its’ LFO rate or it can
accept control signal to be synchronized by other devices. It can also
accept remote tap foot switch.
Tap tempoStarla’s tap tempo
microprocessor calculates tempo by taking the last two user taps so it
plays in sync with your music. You can also choose different tap to
tremolo rate ratios using 1/3/2 Multiplier switch: 1:1, 1:2 and 1:3.
Once a tempo has been tapped in, Multiplier switch serves as an in-time
speed control.
True bypassStarla Tap Tempo Tremolo
is equipped with microprocessor driven true bypass relay switching
system. Holding down Status footswitch during the power up allows you to
preset whether the effect powers up in effect-on or effect-bypass mode.
We are very proud of our Starla™ Tap Tempo Tremolo effect pedal and
we believe it will inspire you to be even more creative in making music!
Enjoy!
Technical Specifications:
Power Input Voltage: 9 - 18V
Power input connector: 5.5mm/2.1mm barrel connector (Negative tip)
Power Consumption: ~ 30mA
PriceA$385
Free Shipping
Free Shipping
from Newtown, Australia
Only 1 left
Grab it before it's gone
