I'm sellin a Yamaha MV800 rack mixer in excellent condition.

Traditional Yamaha's sound and hardware quality.

The MV800 is an easy to operate mixer that offers an excellent balance between line input devices for BGM or Karaoke and microphone input, but you can also find different uses with your sutdio or live setup.

When the hall is divided into two zones, the MV800 also offers individual control of those two zones directly from the front panel without the need to change the wiring making it an excellent mixer for banquet rooms, etc.

Features

• The MV800 provides 8 channels with monaural input jacks, A/B stereo line input jacks and two sets of stereo outputs that are selectable from the front panel.

• Monaural input jacks are equipped with an input select switch that allows compatibility with a wide range of sources such as dynamic microphones, condenser microphones that require an external power source, and line level devices.

• Each monaural channel is equipped with a separate noise gate switch that can be used to eliminate background noise.

• The mixer is equipped with a global compressor circuit that can be applied to the monaural channels to protect the equipment from feedback, sudden loud sounds, etc.

• The mixer is equipped with a ducker circuit on channels 1/2. This function automatically reduces the volume level of the stereo line input jacks when a microphone from channel 1 or 2 is used.

• Input channels 1-8 are equipped with INSERT IN/OUT jacks allowing separate effectors to be connected to individual channels.

• Equipped with two ZONE buses, that include not only monaural and stereo channels but also REC OUT and OUTPUT jacks, a single MV800 easily provides sound control for two rooms.

• Separate REC OUT jacks are supplied for both ZONES 1 and 2 allowing easy recording to a tape deck.

• Along with XLR and phone jacks, Euro-block connectors are also supplied for the main input and output jacks.

• The MV800 is equipped with a paging function for an emergency announcement system. It is also equipped with an input jack for an emergency announcement system’s control signal (DC24V).

• A security cover is supplied to protect switches and settings on the control panel.