Hikari Instruments Quad Switch Eurorack Module

Introducing the Hikari Quad Switch, an incredibly versatile Eurorack routing module featuring four channels, each equipped with two switches—one normally connected and one normally disconnected.

Controlled by a CV input that is normaled down to all four channels, the switches provide flexible signal routing options. When the control CV for a specific channel exceeds 3.9V, the first switch is connected, allowing the signal to pass through. On the other hand, when the control CV for the channel is below 3.4V, the second switch is connected, providing an alternative signal routing path. Between these voltage thresholds, neither switch is engaged, ensuring no signal connection is made. To provide a visual representation of the signal routing, each switch is accompanied by a convenient LED indicator.

Experience unparalleled control and visual feedback with the Hikari Quad Switch. Unlock new possibilities in signal routing and explore creative audio pathways within your Eurorack system.

Power connector: the module ships with the power ribbon cable connected with the red stripe (at the TOP of the module) aligned to -12V.
If you remove or change this cable, please ensure that the side of the ribbon cable at the TOP of the module is connected to the negative rail of your power bus, irrespective of the location of the red stripe. Failure to check this may result in damage to your module upon power-up.