ADDAC System 305 Manual Latches

Description The ADDAC305 Manual Latches is a combination of 8 manual latching switches in a small and elegant module: each button toggles between Gate high / Gate low when pressed, outputting a 5V gate signal. Additionally 4 of the 8 available latches, sport inputs and can act as manual latching switches, allowing the incoming signal to pass to the output when the button is toggled.  
MECHANICAL: Format: Eurorack Width: 8 HP Depth: 2.5 cm  
CONTROL VOLTAGE I/O: CV inputs: ± 10v Gate outputs: 0 +5v  
ELECTRICAL: Max current: 10mA Bus Board Cable: 8 × 2 IDC (Doepfer style) connector  

F.A.Q.

Q: Are the buttons momentary? Will the module send a gate-high signal for as long as the button is held down?    
A: No! The ADDAC305 uses latched/toggle switches (check the ADDAC304 if you want momentary switches instead). The module toggles between +5v and 0v depending if the button is down or up.  
 
Q: Will the module output gates when nothing is connected at the inputs?  
A: If a jack is plugged in an channel which has an input, then when the button is down the incoming signal will be output instead. If there is no input then the channel behaves like all other channels, toggling between +5v when down and 0v when up.
LEAD TIME - IMPORTANT NOTE:
Although this is also described in our Shop Policy page, it is worth stressing that, by virtue of being a small team and not outsourcing a great part of our production, long story short, we sort of make your order on demand.
After you place an order, it takes up to 15 business-days to be ready to ship.
This is why you'll see this module as 'in stock', but this in fact means that we do have all its parts and can produce your module. Thanks for understanding, and for choosing us!