The ferrofish Pulse16 DX is a 1U AD/DA converter with 16 balanced analog inputs and 16 balanced analog outputs. Its digital side covers ADAT, MADI and Dante. This version ships with a singlemode optical MADI SFP module in place of the standard multimode module. It suits studios and live or installed systems that need analog I/O on several digital formats, or a bridge between those formats.

  • 16 x 16 analog I/O: balanced ¼" TRS jacks, with levels set per channel from +20 dBu down to −8 dBu in 1 dB steps
  • Three digital formats: ADAT up to 96 kHz, and MADI and Dante up to 192 kHz
  • Dante: 64 x 64 channels on redundant primary and secondary network ports
  • Singlemode MADI: SFP module intended for long-distance optical links. The module can be swapped for a multimode or coaxial type.
  • Format routing: signals move between analog, ADAT, MADI and Dante in groups of 8 channels
  • Monitoring: two colour TFT displays show the levels of all analog inputs and outputs, and a headphone output has digitally controlled volume

Singlemode compatibility: ferrofish points out that singlemode optical MADI is uncommon. This version only works with other MADI devices that also use singlemode optical modules. If your MADI devices use multimode optics, the standard Pulse16 DX or a replacement SFP module is the better match.

Formats and channel counts: MADI carries 64 channels at 48 kHz, 32 at 96 kHz and 16 at 192 kHz, and it can also transport MIDI. ADAT carries 32 x 32 channels at standard rates and 16 x 16 at 96 kHz.

Remote control and presets: the unit can be controlled over 5-pin MIDI or MIDI over MADI. With firmware 3 or later, the RemoteFish app for Mac and PC can control it over the Dante Ethernet connection. Six preset slots store complete setups. The headphone output can monitor mono or stereo signals from any analog, ADAT, MADI or Dante source, which helps with checking lines during setup.

Clocking: the internal clock uses a temperature-compensated oscillator and a digitally controlled PLL with active jitter reduction. The unit can also sync to word clock on BNC or take its clock from the Dante network.

Dieser Artikel wird verkauft "wie beschrieben"

Dieser Artikel wird verkauft "wie beschrieben" und kann nicht retourniert werden, es sei denn er kommt anders als beschrieben oder fotografiert an. Artikel müssen im Originalzustand mit allen gelieferten Teilen und Zubehör in ursprünglicher Verpackung zurückgesendet werden.Mehr erfahren

Beworbene ähnliche Inserate













ZustandBrandneu (Neu)
Brandneue Artikel werden von autorisierten Händlern oder Herstellern verkauft und kommen in originaler Verpackung.Weitere Informationen
Marke
Modell
  • Pulse16 DX AD/DA Converter with Dante and Singlemode MADI
Kategorien

Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.

Über den Verkäufer

Daily Studio Solutions

ROTTERDAM, Niederlande
Mitglied bei Reverb seit:2018

Reverb-Schutz

Einfache Rücksendungen, sichere Transaktionen, Support von Experten

Weitere Informationen

Sichere Zahlung

Reverb Gives

Mit deinen Käufen unterstützt du Programme zur Förderung Jugendlicher, damit sie das Equipment erhalten, das sie zum Musizieren brauchen.

Ups, sieht aus, als hättest du etwas vergessen. Bitte prüfe die rot hervorgehobenen Felder.