ferrofish A32pro Dante Multimode AD/DA Converter
The Ferrofish A32pro Dante is a 1RU converter and router with 32 channels of analog AD and 32 channels of DA, plus ADAT, MADI and Dante. Ferrofish describes it as its flagship model. It is built for studio, live, broadcast and installation work where many channels need to be converted and routed from a single rack unit.
- 32 × 32 analog I/O on balanced D-Sub25 connectors (TASCAM pinout), up to 192 kHz, with 32-bit ESS converters and switchable filters
- Redundant Dante on two RJ-45 ports with a 64 × 64 channel Brooklyn board. The secondary port takes over if the primary network fails.
- MADI and ADAT through two SFP slots (single-mode, multimode or coaxial modules) and 4 + 4 optical TOSLINK ports
- 192 × 192 routing matrix that sends the analog, MADI and ADAT interfaces into the Dante network, routed in groups of 8
- Dual redundant 12 V DC inputs with monitoring and on-screen or MIDI failure warnings
- Four multitouch TFT screens showing levels for all 64 analog channels, with an illuminated touch-sensitive encoder
Analog levels can be set from -8 dBu to +20 dBu in 1 dB steps, so the unit can be matched to different consoles, stageboxes and outboard gear. Both Dante and MADI have redundant connections. On MADI, the unit switches between optical and coax automatically if the signal is lost, which matters for live and broadcast work.
On the front are two 1/4" headphone outputs, each with its own DAC path. Each can monitor any input or output in mono, stereo or M/S, or both can be combined in a fully balanced mode. A dual balanced TRS main out mirrors one of the headphone feeds. Clocking uses a temperature-compensated oscillator and a digitally controlled PLL, with BNC word clock in and out.
For control there is the RemoteFish app for PC and Mac, which works over USB, MIDI, MIDI-over-MADI or Remote-over-Dante. Four GPIO inputs recall presets 1 to 4, and four alert outputs report status. With Dante Controller and a Dante PCIe card or Dante Virtual Soundcard, the A32pro Dante can also serve as a computer audio interface. The fanless 1RU chassis runs on a SHARC audio core and has two slots for optional DSP sticks.
Dieser Artikel wird verkauft "wie beschrieben"
Dieser Artikel wird verkauft "wie beschrieben" und kann nicht retourniert werden, es sei denn er kommt anders als beschrieben oder fotografiert an. Artikel müssen im Originalzustand mit allen gelieferten Teilen und Zubehör in ursprünglicher Verpackung zurückgesendet werden.Mehr erfahren
| Zustand | Brandneu (Neu) Brandneue Artikel werden von autorisierten Händlern oder Herstellern verkauft und kommen in originaler Verpackung.Weitere Informationen |
|---|---|
| Marke | |
| Modell |
|
| Farbe |
|
| Kategorien |
Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.

