PS10 PS

Made in Japan

PS original tailpiece ornament Seymour Duncan® pickups

The PS10 features Seymour Duncan® '59 model and Custom 5™ pickups which provide a balanced and warm tone.

Ebony fretboard

Ebony produces a tight low and mid range with an iconic attack on the high end. It also features a quick response and rich sustain.

Half-Bone/Half Brass Nut

The PS10 features a specially-designed half bone/half brass nut.

Neck Dimensions

Scale : 628mm//24.7"

Width at NUT (a): 43mm

Width at 22F (b): 57mm

Thickness at 1F (c): 20.5mm

Thickness at 12F (d): 23.5mm

Radius : 305mmR

Switching System

When the pickup selector switch is in the neck position, the neck pickup is active.

When the switch is in the center position, both the neck and bridge pickups are selected.

When the switch is in the bridge position, the bridge pickup is selected.

Controls

With the guitar held in the playing position, there are three knobs located along the lower edge of the body.

From the end of the body towards the neck they are; tone, bridge volume, and neck volume knob.

A three-way pickup selector switch is located towards the upper half of the guitar near the neck pickup.