Shipping Policy: Please note that we currently ship within Canada only. Offers and orders from outside Canada will not be accepted.

Guard your electronic equipment, charge your mobile device, and light up your rack with the Radial Engineering Power-2 rackmount surge suppressor and power conditioner. Awarded Best in Show at NAMM 2020, Power-2 offers a sliding multicolor LED tray and nine outlets—one always-on outlet in front and eight switched outlets on the rear—protected against harmful power surges by the USA-made Metal Oxide Varistor.

With steel construction and robust components, Power-2 is ready for the challenges of constant sessions and live gigs. Plus, it yields low system noise while keeping radio-frequency interference out. Occupying just 1 RU of rack space, Power-2 is an ideal addition to gear racks used by studio operators, musicians, engineers, and producers.

LED Illumination

A tray slides out to illuminate rack equipment below, with ultrabright LEDs in seven color options along with a built-in dimmer to adjust as needed.

Unswitched Front-Panel Outlet

The single front-panel outlet will supply power even when the device is switched off, allowing you to easily connect and charge devices without powering on the entire rack.

Switched Rear-Panel Outlets

Eight rear-panel outlets are activated via the backlit power switch. Four of the eight outlets offer ample spacing for wall warts.

USB Charging Port

Also on the front panel is a 5V/1A USB Type-A charging port for mobile devices such as smartphones and tablets.

Fault Protection Indicator

An LED illuminates when the Power-2's USA-made Metal Oxide Varistor (MOV) is actively working. The MOV is designed to provide continuous protection for your equipment against varying resistance and high-voltage spikes from the AC main power source.

Noise Filtering

Power-2 utilizes shunt-mode technology and is non ground contaminating for lower system noise. A high-rejection RF interference filter is used to keep high frequencies and AM radio signals out of the power line, preventing contamination of audio signals.

Built Tough

A heavy-duty power on/off switch, rugged outlet connectors, and steel construction ensure that the Power-2 performs night after night without fail.

Features

• 8 Rear Outlets, 4 with Wall-Wart Spacing
• 1 Front Outlet
• LED Tray with Color and Dim Controls
• USB Charging for Personal Devices
• USA-Made MOV for Surge Protection
• High-Rejection RF Interference Filter
• LED Indicator for Active Protection
• Illuminated Power Switch
• Rugged, Tour-Ready Construction

Specifications

Type Conditioner / Surge Suppressor Amp Rating 15 A Number of Circuits 1 Metering None Battery Backup No Integrated Lamps Yes, 1x Pull-Out (Front Panel)
Connections Outlets 1x NEMA 5-15R (Front Panel, Unswitched, 1 Block-Sized)
8x NEMA 5-15R (Rear Panel, Switched, 4 Block-Sized) AC Power I/O 1x Hardwired Input Lamp I/O No Additional I/O 1x USB-A Wireless No
Electrical AC Input Power 120 VAC, 50 / 60 Hz Load Capacity Not Specified by Manufacturer Sequencing Delay No USB Output 5 V, 1 A
Protection & Conditioning Protection Types & Modes Overvoltage, Metal-Oxide Varistor (MOV), EMI Filter Circuit Breaker Yes, at 15 A with Push-Button Reset Undervoltage Protection No Clamping Voltage 130 V at 15 A (Line to Neutral) Maximum Spike Current 20,000 A Surge Protection 210 Joules Transformer Isolated No EMI/RFI Noise Filtration Common-Mode:
10 dB (100 kHz)
41 dB (1 MHz)
50 dB (10 MHz)
Traverse/Differential-Mode:
19 dB (100 kHz)
41 dB (1 MHz)
42 dB (10 MHz)
Environmental Certifications CSA, UL Operating Temperature 37 to 72°F / 5 to 40°C
Physical Rackmount Size 1 RU (with Included Hardware) Cable Length 9' / 2.7 m Wire Gauge 14 AWG Material of Construction Steel Cable Management No Dimensions 19 x 6.38 x 1.47" / 48.3 x 16.21 x 3.73 cm
Packaging Info Package Weight 12.42 lb Box Dimensions (LxWxH) 22.7 x 14.2 x 4.6"