The Audio Technica AT2035 Microphone is equipped with a switchable 80 Hz high-pass filter and 10 dB pad. The Audio Technica AT2035 Microphone handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the Audio Technica AT2035 provides an exceptional level of consistency from model to model.

• Large diaphragm for smooth, natural sound and low noise
• High SPL handling and wide dynamic range provide unmatched versatility
• Custom shock mount provides superior isolation
• Switchable 80 Hz high-pass filter and 10 dB pad
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

• Element: Fixed-Charge Back Plate, Permanently Polarized Condenser
• Polar Pattern: Cardioid
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
• Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
• Impedance: 120 Ohms
• Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% THD; 158 dB SPL, with 10 dB Pad (Nominal)
• Noise: 12 dB SPL
• Dynamic Range (Typical): 136 dB, 1 kHz at Max SPL
• Signal-To-Noise Ratio: 82 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 3.8 mA Typical
• Switches: Flat, Roll-Off; 10 dB Pad (Nominal)
• Weight: 403 g (14.2 oz)
• Dimensions: 170.0 mm (6.69") Long, 52.0 mm (2.05") Maximum Body Diameter
• Output Connector: Integral 3-Pin XLRM-Type
• Audio-Technica Case Style: R5

• Audio Technica AT2035 Microphone
• Audio Technica AT8458 Shock Mount for 5/8"-27 Threaded Stands
• 5/8"-27 to 3/8"-16 Threaded Adapter
• Soft Protective Pouch
• 2 Year Warranty