The Yamaha REVSTAR Series RSE20 is crafted with meticulous attention to detail and careful workmanship, made possible by the masterful skills of the technicians who have supported and carried on Yamahafs traditional techniques throughout the brandfs 50-year history.

It features a chambered mahogany body, a 3-piece mahogany neck, a rosewood fingerboard with a 42mm nut and medium scale (350R), VH3n and VH3b pickups, volume and tone controls (with a dry switch), a 3-way selector switch, and a Tun-O-Matic bridge with a stop tailpiece.

This model boasts a striking appearance, excellent playability, and a wide range of sound variations.

There are signs of wear (such as a chip on the headstock tip, scuffs, playing scratches, picking marks, and tarnish or pitting on metal parts and screws, among other cosmetic damage).

It was set up upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret shaping, deburring, and replacement of rusted screws). The frets are at a height that poses no issues for playing, and the truss rod can be adjusted in both tightening and loosening directions; it has been tested to operate up to }60‹ and is in good working condition.

Condition Grade: B+: Some minor scratches, but no issues for normal use

Serial Number: IKH223440
Country of Manufacture: Indonesia
Case: Soft case
Weight: 3.54 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Scale: 628 mm (24.75")
Radius: 305 mm (12")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string action adjustment, fret shaping, deburring, replacement of rusted screws

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.

* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
All import duties, customs fees, and procedures are the buyer's responsibility - please be aware of the requirements for your country

We will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.

More information please confirm our shop policy.

Inseriertvor einem Tag
ZustandGut (Gebraucht)
Artikel mit Zustand Gut funktionieren einwandfrei, können aber einiges an Makeln oder Spielspuren aufweisen.Weitere Informationen
Marke
Modell
  • Revstar II RSE20
Kategorien
Griffbrettmaterial
  • Palisander
Korpusmaterial
  • Mahagoni
Halskonstruktion
  • Set-Hals
Farbfamilie
  • White
Korpusform
  • Double Cutaway
  • Solidbody
Rechts-/Linkshändig
  • Für Rechtshänder
Anzahl der Saiten
  • 6-Saiter
Halsmaterial
  • Mahagoni
Offset-Körper
  • Non-Offset-Korpus
Finish-Stil
  • Glänzend
Steg/Tailpiece-Typ
  • Anschlagleiste
Tonabnehmerkonfiguration
  • HH
Deckenholz
  • Undurchsichtig
Mensur
  • 24,75 Zoll
Anzahl der Bünde
  • 22

Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.

ISHIBASHI MUSIC

Chiyoda-ku, Japan
Mitglied bei Reverb seit:2016

Reverb-Schutz

Einfache Rücksendungen, sichere Transaktionen, Support von Experten

Weitere Informationen

Sichere Zahlung

Beworbene ähnliche Inserate













Produktrezensionen

Reverb Gives

Mit deinen Käufen unterstützt du Programme zur Förderung Jugendlicher, damit sie das Equipment erhalten, das sie zum Musizieren brauchen.

Ups, sieht aus, als hättest du etwas vergessen. Bitte prüfe die rot hervorgehobenen Felder.