Wefve received a used AV II 61 STRAT RW OWT!

It features a 1961 gCh-shaped neck with a 7.25-inch radius slab rosewood fingerboard.
Itfs equipped with three Pure Vintage f61 Stratocaster pickups, each voiced to match the specific era, delivering a vintage-like tone and playability.

This guitar lets you fully enjoy the vintage Fender look and feel that is unique to the American Vintage II series.
Although the neck shows some signs of use, the guitar has been thoroughly cleaned and fully adjusted since arrival and is in perfect playing condition.

See the manufacturerfs page below
Body Material: Alder
Body Finish: Gloss Nitrocellulose Lacquer
Neck: Maple, 1961 gCh
Neck Finish: Gloss Nitrocellulose Lacquer
Fingerboard: Slab Rosewood, 7.25h (184.1 mm)
Nut (Material/Width): Bone, 1.650h (42 mm)
Scale Length: 25.5h (64.77 cm)
Bridge: Pure Vintage Synchronized Tremolo with Bent Steel Saddles
Pickups: Pure Vintage f61 Single-Coil Strat (Bridge), Pure Vintage f61 Single-Coil Strat (Middle), Pure Vintage f61 Single-Coil Strat (Neck)
Pickup Switching: 5-Position Blade: Position 1: Bridge Pickup; Position 2: Bridge and Middle Pickups; Position 3: Middle Pickup; Position 4: Middle and Neck Pickups; Position 5: Neck Pickup
Controls: Master Volume, Tone 1 (Neck/Middle Pickups), Tone 2 (Bridge Pickup)
Hardware Finish: Nickel/Chrome
Strings: Fender USA 250R Nickel-Plated Steel (.010?.046 gauges), PN 0730250406

Condition: B+: Has some minor scratches but is in good working condition for normal use

Serial Number: V2558160
Country of Manufacture: USA
Case: Hard Case
Accessories: Tremolo arm, wrench, bridge cover
Weight: 3.55 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.68 mm
Neck thickness near the 1st fret: 20.63 mm
Neck thickness near the 12th fret: 23.79 mm
Scale length: 648 mm (25.5")
RADIUS: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling

* As this is a used item, please note that there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here.

* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.

* This item is a one-of-a-kind piece, and we list it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
All import duties, customs fees, and procedures are the buyer's responsibility - please be aware of the requirements for your country

We will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.

More information please confirm our shop policy.