I made a clone of the MXR M199 TAP TEMPO switch with the ability to change what the switch does through an internal dip switch. 1- ring to ground, 2- tip to ground, 3- both to ground. two diodes are installed which keeps the tip and ring circuit separated in setting 3. The MXR tap switch uses a tactile switch, which are cheap and unreliable. I've used a soft mechanical normally open switch for better durability. I wanted to make and sell these as the real ones are drastically overpriced IMO. If there's ever a failure, send it back and ill fix it. message for questions or service. These are unpainted for cost.

This is version 2! I removed the board, and did point-to-point for quicker construction.

L-2"xW-2"xH-1.25"