A 12-inch ceramic full-range speaker for use with amp modellers and IRs

Finally a dedicated guitar speaker for amp modellers and IRs: the F12-X200 is a truly full range driver that delivers a frequency response from 60Hz all the way up to 20kHz. The higher frequency part of the signal is reproduced using a Celestion compression driver which has been integrated using a high quality crossover circuit, this enables the F12-X200 to reproduce the full spectrum of audible frequencies for the most accurate output possible whatever your environment and set-up.

The F12-X200’s response is remarkably neutral with Celestion technology built in to ensure there are no unwanted colourations that can overpower the input signal. However the lighter moving mass and straighter sided cone of the type commonly used with guitar speakers gives the X200 the feel and live response of a traditional guitar speaker delivering all the physical feedback you’d expect from playing through a conventional guitar rig. It’s not just FRFR, it’s Full Range LIVE Response.

Used with amp modellers or IRs, in a backline cab or wedge monitor, on stage or in the studio; it doesn’t just sound like great guitar tone it feels like it too.

Specifications

12in Diameter

8Ω Rated impedance

97dB Sensitivity

Nominal diameter 305mm / 12in

Power rating 200W

Rated impedance 8Ω

Sensitivity 97dB

Chassis type Pressed steel

Magnet type Ceramic

Voice coil diameter 2in / 51mm

Voice coil material Round copper

Frequency range 60-20,000Hz

Resonance frequency, Fs 75Hz

DC resistance, Re 5.91Ω

Parameters

D 0.26m / 10.24in

Fs 69.8Hz

Mms 50.19g / 1.77oz

Qms 12.007

Qes 0.831

Qts 0.777

Re 5.91

Vas 47.3l / 1.67ft3

BI 12.5

Cms 0.103

Rms 1.834

Le (at 1kHz) 0.102mH (complete system)

Mounting Information

Cut-out diameter 283mm / 11.1in

Diameter 309mm / 12.2in

Magnet structure diameter 170mm / 6.7in

Mounting hole dimensions 7.9mm / 0.31in Ø

Mounting hole PCD 297mm / 11.7in

Number of mounting holes 8

Chassis depth (inc gasket) 98mm / 3.86in

Magnet depth 67mm / 2.64in

Overall depth 165mm / 6.5in

Unit weight 4.1kg / 9.1lb