Neumann KH 120-II Stereo Set (PAIR) - black

Brand new! Sealed Boxes!

Neumann´s acclaimed studio monitor taken to a new level with deeper bass, higher resolution, and DSP power.

- High-precision drivers, Mathematically Modelled Dispersion™ (MMD™) waveguide

- Linear frequency response 44 Hz … 21 kHz (±3 dB)

- Linear phase response 120 Hz … 16 kHz (±45°) with latency <2.6 ms

- DSP inside allows for room adaptive alignment via Neumann´s MA 1

- Razor sharp imaging due to extremely low tolerances (±0.5 dB)

- May be combined with other KH line speakers in immersive or surround setups

Technical Data:

Free field frequency response ±3 dB: 44 Hz ... 21 kHz

Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu): <20 dB(A) SPL

Max. SPL calc. in half space at 3% THD at 1 m (averaged between 100 Hz and 6 kHz): 116.8 dB SPL

Acoustical Principle: Bassreflex, Ports at the front

Analog input(s): XLR: analog electronically balanced

Analog input impedance: 24k Ohms

Digital input(s): RCA (75 Ω): S/PDIF

Input gain control (sensitivity): 0 dB ... -15 dB

Output level control (output level in 1 m based on 0 dBu input level): 94; 100; 108; 114 dB SPL

Equalization: Bass: 0; -2; -4; -6 dB

Equalization: Low-Mid: 0; -2; -4; -6 dB

Equalization: Treble: +1; 0; -1; -2 dB

Control: Local; Network

Crossover frequency: 1.7 kHz

FIR phase correction: Linear phase (120 Hz ... 16 kHz; +/- 45°)

Protection circuitry: Independent soft clip, peak and thermo limiters for woofer and tweeter; Woofer excursion limiter; thermo limiter for the electronics and amplifiers

Output power woofer amplifier (THD+N with limiter deactivated: 10%): 145 W

Output power tweeter amplifier (THD+N with limiter deactivated: 10%): 100 W

Woofer: 130 mm (5.25") with protecting metal grille

Tweeter: 25 mm (1") with protecting metal grille