Selling this unit for downsizing and streamlining my studio rack, works and sounds as it should!

This is the upgraded Ivory 2 (Series 2 / MkII) version of the 5013—a really nice unit to warm up digital samples and shape your tracks with real tubes. Always kept racked in the same studio location.

Specs:

Changes from Version 1 (MkI) to Version 2 (Ivory 2 / MkII):

  • Push-Pull Peak/Shelf Switching: Pulling the Q knob on the LF and HF bands switches them from peaking to variable-frequency shelving filters (the MkI only had peaking filters on all four bands).
  • "Fat" Contour Switch: Adds a dedicated per-channel contour (+2 dB at 50 Hz, -0.9 dB at 720 Hz, +1.8 dB at 10 kHz) to sweeten stereo mixes or drum busses instantly.
  • Enhanced Tube Drive & Bypass Warmth: Features two valve stages per channel (pre-EQ and post-EQ) at 150V DC; the input tube stays active even with EQ bypassed to warm up signals, paired with new Drive and Peak LEDs.
  • Redesigned DI & Line Circuitry: Upgrades the front-panel Instrument/DI inputs to a 1 MOhm high-impedance design and lowers the noise floor across the line-level I/O.
  • Digital Expansion Slot: Adds a rear expansion bay for the optional DO-2 24-bit S/PDIF digital output card.

Other Specs:

  • Form Factor: 2U 19-inch rack-mount chassis (483 × 200 × 88 mm, 2.5 kg)
  • Valves: 2 × Sovtek ECC83 / 12AX7A twin-triode tubes (2 stages per channel, pre-EQ and post-EQ) running on a stabilized 150V DC supply
  • Line Inputs: Electronically balanced XLR and unbalanced 1/4" TRS jacks, +/- 20 dB variable gain, switchable +4 dBu / -10 dBu nominal level (+26 dBu max)
  • Instrument / DI Inputs: Front-panel 1/4" high-impedance (1 MOhm) auxiliary inputs per channel with -2 dB to +38 dB gain range
  • Outputs: Balanced XLR (+26 dBu max, 47 Ohms) and unbalanced 1/4" jacks (+18 dBu max), with center-detented +/- 20 dB Output Gain control
  • LF Band: +/- 15 dB, sweepable from 30 Hz to 1 kHz, variable Q (0.5 to 5), push-pull Q knob for Peaking or Shelving mode
  • Low-Mid (LM) Band: +/- 15 dB fully parametric peaking, sweepable from 100 Hz to 3 kHz, variable Q (0.5 to 5)
  • High-Mid (HM) Band: +/- 15 dB fully parametric peaking, sweepable from 1 kHz to 12 kHz, variable Q (0.5 to 5)
  • HF Band: +/- 15 dB, sweepable from 3 kHz to 20 kHz, variable Q (0.5 to 5), push-pull Q knob for Peaking or Shelving mode
  • Controls & Metering: Global EQ Bypass per channel (leaves input tube stage active), "Fat" contour switch, and Drive / Peak LEDs
  • Frequency Response: 10 Hz to 40 kHz (+0, -1 dB)
  • Dynamic Range & Noise: 106 dB dynamic range, -80 dBu noise floor (22 Hz to 22 kHz), less than 0.5% THD at unity gain
  • Power Supply: Internal linear PSU (selectable 220-240V / 110-120V) with detachable IEC cable

Dieser Artikel wird verkauft "wie beschrieben"

Dieser Artikel wird verkauft "wie beschrieben" und kann nicht retourniert werden, es sei denn er kommt anders als beschrieben oder fotografiert an. Artikel müssen im Originalzustand mit allen gelieferten Teilen und Zubehör in ursprünglicher Verpackung zurückgesendet werden.Mehr erfahren

Beworbene ähnliche Inserate













Inseriertvor 5 Tagen
ZustandSehr gut (Gebraucht)
Artikel im Zustand Sehr gut können ein paar Makel oder Macken haben, aber funktionieren einwandfrei und sind ingesamt gut erhalten.Weitere Informationen
Marke
Modell
  • TLA Ivory 5013 Dual Valve Equalizer
Kategorien

Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.

Über den Verkäufer

FrostWoods Studio

Modena, Italien
Mitglied bei Reverb seit:2019

Reverb-Schutz

Einfache Rücksendungen, sichere Transaktionen, Support von Experten

Weitere Informationen

Sichere Zahlung

Reverb Gives

Mit deinen Käufen unterstützt du Programme zur Förderung Jugendlicher, damit sie das Equipment erhalten, das sie zum Musizieren brauchen.

Ups, sieht aus, als hättest du etwas vergessen. Bitte prüfe die rot hervorgehobenen Felder.