Yamaha MG10XU 10-Channel USB Mixing Console Full-Range PA Bundle with 2x DBR15 15-Inch 1,000W Powered Loudspeakers

Yamaha MG10XU Bundle: A Full-Range 15-Inch PA That Fills the Room Without a Subwoofer

This bundle pairs the Yamaha MG10XU 10-channel USB mixing console with two DBR15 15-inch 1,000W powered loudspeakers — the largest mains in the DBR line. It is built for the band, mobile DJ, or worship team that needs real low-end and room-filling volume from a rig one person can load in. The MG10XU handles the inputs, EQ, compression, and effects; the DBR15 pair turns that mix into 132 dB of full-range output that reaches down to 50 Hz, so a dedicated subwoofer is optional rather than mandatory. Everything routes with standard XLR cables, and the whole front end weighs 4.63 lb.

4 D-PRE Preamps, 1-Knob Compressors, and SPX Effects in a 4.63 lb Console

The MG10XU gives you four studio-grade D-PRE microphone preamps — a discrete Class-A design with an inverted Darlington pair that delivers clean, low-noise gain at -128 dBu equivalent input noise. Each of the four mono channels has a 1-knob compressor that sets threshold, ratio, and makeup gain in a single turn, so a hot vocal or a slap bass sits in the mix without a separate outboard unit. The onboard SPX engine adds 24 editable programs — reverb, delay, chorus, flanger, and more — and a 3-band EQ with a switchable 80 Hz high-pass filter on every mono channel keeps stage rumble and handling noise out of the house. It all lives in a powder-coated metal chassis that weighs 4.63 lb.

Built-In 24-Bit/192 kHz USB Interface and Cubase AI for Recording and Streaming

The console doubles as a 24-bit/192 kHz USB Audio Class 2.0 interface, 2-in/2-out, so you can record the stereo mix straight to a Mac, Windows machine, or tablet and play backing tracks back through the PA — no separate interface to buy or patch. The included Cubase AI download gives you a full multitrack DAW to capture rehearsals and gigs. For a streamer or podcaster, the same connection sends a clean, effects-processed mix to the computer in one cable. The USB link is class-compliant, so it works with no driver install.

Two DBR15 15-Inch Mains: 1,000W, 132 dB, and 50 Hz Reach With No Sub

Each DBR15 is a 1,000W Class-D bi-amp powered loudspeaker — 800W to a custom 15-inch woofer with a 2.5-inch voice coil and 200W to a 1.4-inch compression driver — for a 132 dB peak SPL and well-defined low end down to 50 Hz. That is the reach that lets a 15-inch pair carry full-program music, kick, and bass for live bands and dance floors without adding a subwoofer. A FIR-X linear-phase crossover at 2.1 kHz keeps transients tight and the response coherent across a 90-degree by 60-degree pattern, and the whole cabinet weighs 42.6 lb with dual side handles for one-person load-in.

D-CONTOUR DSP and an Onboard Mixer Make Each DBR15 a Main or a Floor Monitor

Each DBR15 carries D-CONTOUR onboard DSP with FOH/MAIN and MONITOR presets — one switch retunes the cabinet for front-of-house duty or, using the 50-degree wedge angle of its symmetrical enclosure, for use as a stage floor monitor. An onboard 2-channel mixer (CH1 XLR/TRS combo, CH2 combo plus RCA) and an XLR thru/mix output let the speaker run a small source on its own or daisy-chain to a second cabinet. A 35 mm pole socket and M8 rigging threads cover tripod stands, sub-pole stacking, and bracket installs.

How the MG10XU and DBR15 Pair Work Together as One PA

The signal path is simple: mics and instruments go into the MG10XU's D-PRE channels, get shaped with EQ, compression, and SPX effects, and leave the balanced STEREO OUT as left and right. Two standard XLR cables carry that to the two DBR15 mains on tripod poles, where the Class-D amps and D-CONTOUR DSP turn it into full-range house sound. The console's MONITOR OUT and AUX[FX] send can feed a stage monitor mix, and the USB port captures or streams the whole thing. One small console, two big speakers, standard cabling — a complete PA.

For Gigging Bands, Mobile DJs, and Worship Teams Who Need Maximum Output

First-timers get a complete, plug-and-play PA: a console that is easy to learn and two mains that simply need power and a pole. Upgraders moving from a smaller 10- or 12-inch rig get the extra low-end and headroom that 15-inch woofers and 132 dB deliver, with no subwoofer to haul. The buyer comparing systems gets hard numbers — 1,000W per cabinet, 50 Hz reach, 24-bit/192 kHz recording, and a 4.63 lb console — that show this rig covers full-band live sound, mobile DJ dance floors, and full-program worship in one purchase.