Powersoft T302 2-Channel Power Amplifier - Mint, Open Box - Used - Like New

The New Benchmark For Cost-Effective Power Amplification - The Powersoft T302 2-Channel Power Amplifier

Customer Return – Like New (Box & Contents Included)

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

• The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors. The T Series can be controlled and configured in different ways
• Full control with a PC running Armonia. Here it can be in mixed groups with advanced EQ together with other Powersoft products
• Control from the front panel display for things like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring
• Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc
• Group controllable advanced EQ with raised cosine filters
• Large preset library
• Preset compatibility with X Series
• Very long FIR filters (42.6 ms)
• Control and monitoring through ArmoniaPlus

SPECIFICATIONS

General

• Number of channels: 2
• Output power: Single channel mode (2, 4, 8 Ohms @ 1500 W, 1500 W, 1200 W)
• Bridge mode (4, 8 Ohms @ 3000W)
• Max output voltage / current: 145 Vpeak / 50 Apeak

AC Main Power

• Power supply: Universal, regulated switch mode
• Nominal power requirement: 100-240 V +/- 10%, 50-60 Hz
• Operating voltage: 90 V - 264 V
• Power consumption: 115 V/230 V
• Idle: 23 W
• 1/8 of max output power @ 4 Ohms: 517 W/4.6 A; 527 W/2.7 A

Thermal

• Operating temperature range: 0 ° - 45 ° C / 32 ° - 113 ° F
• Thermal dissipation:115 V 230 V
• 1/8 of max output power @ 4 Ohms: 485 BTU/h/122.2 kcal/h; 517 BTU/h/130.3 kcal/h

Audio

• Gain: 32dB
• Input sensitivity: 2.57 Vrms
• Max input level: 24 dBu
• Frequency response: 20 Hz - 20 kHz ( ±0.5 dB) @ 1 W, 8 Ohm
• S/N ratio: greater than 110 dB (20 Hz - 20 kHz, A weighted)
• Crosstalk separation: less than -70 dB @ 1kHz
• THD+N: less than 0.1% (typical less than 0.5%)
• IMD: less than 0.1% (typical less than 0.5%)
• Input impedance: 20 kiloohm balanced

DSP

• AD Converter: 24 Bit Tandem @ 48 kHz 125 dB-A Dynamic Range - 0.005 % THD+N
• DA Converter: 24 Bit Tandem @ 48 kHz 117 dB-A Dynamic Range - 0.003 % THD+N
• Memory/presets: 256 MB (RAM) plus 512 MB flash for presets
• Input equalizer: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
• Crossover: linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
• Delay: 2 s (input) + 100 ms (output) for time alignment
• Limiters: TruePower, RMS voltage, RMS current, Peak limiter
• Damping control: Active Damping Control and Live Impedance measurement

Front Panel

• Indicators and Controllers: 8 x Push-button - Setting operating parameters
• 1 x Display - Settings and monitoring
• 1 x Power switch

Connectors

• AC main: 1 x IEC C20 connector - 20 A max (region-specific power cord provided)
• Audio signal input: 2 x XLR - Signal input
• Loudspeakers: 2 x speakON - Neutrik NL4MD
• Network/data: 1 x Rj45 socket - RS485 data connection (non-DSP version)
• 1 x Rj45 socket - DANTE

Construction

• Dimensions (L x H x W): 484 mm x 44.45 mm x 405 mm (19.1 in x 1.8 in x 16.0 in)
• Weight: 6.7 kg (14.8 lb)

Manufacturer: Powersoft Audio
Model: T302
SKU: I588485-GA20260209A-1-WHXE

We are Chuck Levin's Washington Music Center

Since 1958, Chuck Levin’s Washington Music Center has been the trusted destination for musicians and audio professionals across Maryland, Virginia, and Washington, D.C. Family-owned and operated, our legendary music store delivers Everything in Music®—from instruments and recording gear to pro audio, rentals, and repair services.

Our team of musicians and industry experts lives and breathes gear, helping you build the perfect setup for your next performance, studio session, or installation. As an authorized dealer for top brands, we also offer our award-winning CHUCKSCLUSIVE line—exclusive, limited-edition instruments and collaborations recognized with the NAMM Top 100 Dealer Innovation Award for redefining what a music retail experience can be.

Chuck Levin’s isn’t just a store—it’s a community built by players, engineers, and creators who share a lifelong passion for sound. Stop by our legendary Wheaton, MD showroom or contact us anytime for expert advice, product questions, or the best possible deal on your next piece of gear.