Grit your teeth and hold on. DigiTech DOD Boneshaker Distortion Pedal is a straight-pipe, hard-tail run down a dirty, choppy road. Designed in collaboration with Black Arts Toneworks, the Boneshaker is a dirty boost with a powerful 3-band semi-parametric EQ. The Boneshaker can smack the front end of your amp into overdrive, or sculpt the tone of your fuzz to stand out in a mix. If your already dirty amp channel needs a little bit of a goose and you want full control over every frequency, the Boneshaker is just the ticket.
Distortion Control
This control is used to adjust the amount of distortion being applied to your signal. Turn this clockwise to increase the distortion.
Depth Control
The control increases or decreases the overall low-frequency ‘growl’ of extended-range instruments.
Level Control
This control is used to adjust the overall volume level of the distortion effect.
Low Control
This selects the boost or cut of the low frequency (set by the Low Frequency Control).
Low Frequency
This control is used to select the low-frequency center.
Mid Control
This selects the boost or cut of the mid-frequency (set by the Mid Frequency Control).
Mid Frequency
This control is used to select the mid-frequency center.
High Control
This selects the boost or cut of the high frequency (set by the High Frequency Control).
High Frequency
This control is used to select the high-frequency center.
Footswitch
Press to turn the effect on or off.