The AT8035 Line + Gradient Condenser Microphone’s long, 14.53" design makes it a great solution for on-the-fly outdoor recording, ENG, EFP, and other video production applications. It works nicely for either boom and handheld use, and provides the narrow acceptance angle that is desirable for long-distance sound pickup. It features excellent sound rejection of signals from the rear and sides of the mic and includes switchable low-frequency roll-off. Additionally, it conveniently operates on either battery or phantom power.

Applications

• On-the-fly outdoor recording
• Long-distance sound pickup for video production and Broadcast
• ENG/EFP
• Other video production applications

Includes

• AT8035 14.53" Line + Gradient Condenser Mic
• Stand clamp
• Threaded adapter
• Windscreen
• Battery
• Protective carrying case

Features

• Designed for video production and Broadcast audio acquisition
• Switchable low-frequency roll-off
• 14.53" length is well-suited to ENG, outdoor recording and other specialized uses
• Narrow acceptance angle for long-distance pickup
• Excellent side and rear sound rejection

Specifications

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Line + Gradient
• Frequency Response: 40 - 20,000Hz
• Low Frequency Roll-Off: 80Hz, 12dB/octave
• Open Circuit Sensitivity:
  • Phantom: 250Ω
  • Battery: 300Ω
• Maximum Input Sound Level:
  • Phantom: 132dB SPL, 1kHz @ 1% THD
  • Battery: 120dB SPL, 1kHz @ 1% THD
• Dynamic Range (typical):
  • Phantom: 110dB, 1kHz @ Max SPL
  • Battery: 98dB, 1kHz @ Max SPL
• Signal-to-Noise Ratio: 72dB, 1kHz @ 1Pa
• Phantom Power Requirements, typical: 11-52VDC, 2mA
• Battery Type: 1.5V AA / UM3
• Battery Current/Life: 0.4mA / 1200 hours, typical (alkaline)
• Switch: Flat, roll-off
• Weight: 6oz. (170g)
• Dimensions (L x Dia): 14.53" x 0.83" (369 x 21mm)
• Output Connector: Integral 3-pin XLRM-type
• Note: further information can be found within the items located under the "Documentation" tab above.